Digital Trainer Manufacturer,Supplier and Exporter in India
Product Code : EL-BT-1483
Jlab Export is a leading Digital Trainer Manufacturer,and suppliers in India
Digital Trainer (code EL-BT-1483) is a breadboard trainer for introductory digital electronics, from setting logic levels and using a logic probe to gates, latches, flip-flops and an asynchronous up/down counter. It has a 1680 tie-point solderless breadboard, eight logic switches and eight LED indicators, and comes with a starter set of logic ICs. JLab, the trading name of Jain Laboratory Instruments Pvt Ltd, makes it at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Experiments | LED display; getting a pulse; setting a logic level; getting a clock and using the logic probe; AND gate and OR gate (static operation); dynamic operation of the AND and OR gates; NOT, NAND, NOR, exclusive-OR (XOR) and XNOR gates; three-state buffer; RS latch; basic JK flip-flop; monostable multivibrator; asynchronous up/down counter |
| Breadboard | Solderless, 1680 interconnected tie points |
| Pulse switches | 2 bounce-free push buttons |
| Logic switches | 8 logic level switches, DIP type |
| Logic level indicators | 8 buffered LED indicators |
| Power supply | Fixed +5 V at 750 mA |
| Power sockets | Logic probe power supply sockets |
| Variable clock | Fine adjustment of clock frequency; range L: 10–40 Hz, range H: 1–20 kHz |
| Jacks | 2 mm to BNC socket, 2 nos; 2 mm to 4 mm socket, 2 nos |
| ICs provided | 4001 (1), 7400 (3), 7402 (1), 7404 (1), 7408 (1), 7432 (1), 7476 (2), 7486 (1), 74126 (1) |
| Other components provided | Resistors, 1/4 W ±5%: 230 Ω (1), 10 kΩ (1), 39 kΩ (1); LED, 5 mm (1) |
| Logic probe | 1, with 2 mm banana pin |
| Accessories | Mains cord; 2 mm red and black patch cords, 5 each; 2 mm to 1 mm red and black patch cords, 5 each |
| Instruction manual | Detailed operating instructions |
| Mains supply | 230 V ±10%, 50 Hz AC |
| Quality check | Each trainer is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-BT-1483 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with Other JLab Logic Trainers?
| Trainer | DC supply | Clock | Logic inputs | Output indicators |
|---|---|---|---|---|
| This Digital Trainer (EL-BT-1483) | Fixed +5 V, 750 mA | Variable, 10–40 Hz and 1–20 kHz ranges | 8 DIP logic switches; 2 bounce-free pulse switches | 8 buffered LEDs |
| Digital IC Trainer TTL | Fixed 5 V ±1%, 1.5 A | Variable, 1 Hz to 1 MHz in three ranges | 4 High/Low switches | 2 red LEDs; common-anode seven-segment display |
| Logic Gates Circuit Trainer | Fixed 5 V ±1%, 1 A | Clock pulse of 1 second | 4 debounced HI/LO switches | 4-bit LED indicator |
Choose the Digital Trainer when exercises need more inputs and outputs at once — it has eight logic switches and eight LED indicators, against four switches on each of the other two trainers.
What Is the Digital Trainer Used For?
It is a first digital electronics trainer for polytechnic, ITI and engineering students. The exercises begin with the trainer itself — reading the LED display, taking a pulse, setting logic levels and checking the clock with the logic probe — and then move through the gates to storage and timing circuits. Each gate is studied both statically, with fixed levels from the logic switches, and dynamically, with the clock on one input so students can see the gate pass or block the pulses according to the level on its other input.
What to Specify When Ordering
- Quantity — the number of Digital Trainers for the lab.
- Mains supply — the trainer runs on 230 V ±10%, 50 Hz AC; confirm that this suits the supply at your site.
- Other trainers — the trainers compared above and linked below are separate items that can be added to the same enquiry.
Frequently Asked Questions
What comes with the Digital Trainer?
Nine types of IC (4001, 7400 ×3, 7402, 7404, 7408, 7432, 7476 ×2, 7486 and 74126), three resistors, a 5 mm LED, a logic probe with a 2 mm banana pin, a mains cord, ten 2 mm patch cords, ten 2 mm to 1 mm patch cords and the instruction manual.
What is the logic probe used for?
Touching it on a point in the circuit shows whether that point is high, low or pulsing, which is often quicker than wiring an LED to every node. It is powered from the logic probe sockets on the trainer.
What are the 2 mm to BNC and 2 mm to 4 mm sockets for?
They link the 2 mm patch-cord system of the trainer to instruments and leads that use BNC or 4 mm connectors; BNC is the usual connector on oscilloscopes and signal generators.
Why are the pulse switches bounce-free?
The contacts of an ordinary push button bounce for a few milliseconds and produce several pulses instead of one, so a counter would jump by more than one count. Bounce-free switches give a single clean pulse per press.
What is a three-state buffer?
A buffer whose output can be high, low or switched off into a high-impedance state, so several outputs can share one line without fighting each other.
What should an export enquiry include?
The number of trainers, the destination country with the port or city, your delivery terms (for example FOB or CIF), any packing or labelling instructions and a tender reference if one applies.
Who manufactures the Digital Trainer?
It is made by Jain Laboratory Instruments Pvt Ltd (JLab) in Ambala, Haryana, India.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a manufacturer of digital and analog electronics trainers and other educational laboratory equipment in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. The Digital Trainer is assembled in JLab’s own works rather than bought from a trader, so institutes, dealers and importers buy direct from the maker and come back to the same source for repeat orders and spares. JLab exports worldwide and ships to buyers in every region — for example the Maldives in South Asia, Sweden in Northern Europe, Uganda in East Africa, Switzerland in Western Europe and New Zealand in Oceania. Tender buyers can see the JLab lab tenders page.
Related Digital Trainers
- Digital Lab — a compact breadboard trainer with clock generators, logic level indicators and DC regulated supplies, for code converters, counters and a shift register.
- Bread Board Circuit Lab — a 1680 tie-point breadboard trainer with digital meters, a continuity tester and clock generators.
All models are listed under Breadboard Trainers in Electronics Lab Equipments.
Request a Quote
Use the Add To Cart button on this page or the contact page to ask for a quotation, with the number of Digital Trainers, the delivery destination and any other trainers you want quoted at the same time.
Last updated: 22 October 2026
