Double Beam Balance (2000gm) Manufacturer,Supplier and Exporter in India
Product Code : EL-SLE-4813
Jlab Export is a leading Double Beam Balance (2000gm) Manufacturer,and suppliers in India
Double Beam Balance (2000gm) (code EL-SLE-4813) is a mechanical beam balance that weighs up to 2 kg when used with supplementary masses, built on a cast alloy base with centre-reading angle beams, a full tare beam and a 150 mm diameter pan. A spring-loaded zero-adjust compensator and accurately ground knife-edges make it a dependable weighing balance for school and college labs. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Capacity | Up to 2 kg (2000 g) with supplementary masses |
| Base | Cast alloy |
| Beams | Angle beams with centre reading; aluminium alloy box-end beam |
| Tare | Full tare beam with a poise that slides and rotates for fine adjustment |
| Zero setting | Spring-loaded zero-adjust compensator |
| Pivots | Accurately ground knife-edges |
| Pan | 150 mm diameter |
| Not stated in this listing | Capacity on the beams alone, readability, and whether the supplementary masses are included — confirmed in the quotation |
| Quality check | Each balance is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-SLE-4813 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with Other JLab Double Beam Balances?
| Model | Capacity | Other listed details |
|---|---|---|
| This balance (EL-SLE-4813) | Up to 2 kg with supplementary masses | Cast alloy base; centre-reading angle beams; full tare beam with sliding, rotating poise; zero-adjust compensator; ground knife-edges; 150 mm pan |
| Double Beam Balance (two pan, accessories listed) | 210 g on the sliding masses; 2000 g with supplementary masses | Beams 0–200 g x 10 g and 0–10 g x 0.1 g; zero-adjust compensator and magnetic damping; un-calibrated tare beam listed as an accessory |
| Double Beam Balance (two pan) | 210 g on the beams; supplementary masses extend it to 2 kg | Two beams with centre-reading sliding masses, 0–200 g x 10 g and 0–10 g x 0.1 g; zero adjuster and magnetic damping |
Choose this model when you want the tare beam built in, with a poise that can be slid and rotated for fine adjustment, on a cast alloy base. The other two listings give the beam graduations and magnetic damping in detail, which helps if your tender schedule specifies them.
What Is a Double Beam Balance Used For?
A double beam balance weighs by comparison: the load on the pan is balanced by sliding masses on the graduated beams, and supplementary masses extend the range for heavier objects — up to 2 kg on this model. Because it compares masses, it reads the same anywhere and needs no power, which makes it a good balance for teaching mass and weight, finding the density of solids and liquids in class 9 science, and routine weighing of chemicals, soil, seeds and specimens in school and college labs. The tare beam lets a student balance out an empty beaker or dish first, so the main beams then read the mass of the contents directly.
Keep the balance on a firm, level bench and set the pointer to zero with the compensator before each session. Place loads gently in the centre of the pan, never drop objects onto it, and keep the knife-edges clean and free from knocks, since they are the pivots the accuracy depends on. Return the poises to zero after use and cover the balance against dust.
What to Specify When Ordering
- Supplementary masses — confirm whether they are needed with the balance to reach the 2 kg range.
- Specification details — ask for beam graduations and readability if your tender lists them.
- Quantity and weights — the minimum order is 10 units; add a weight set or other balances to the same enquiry.
Frequently Asked Questions
What is the maximum capacity of this balance?
It weighs up to 2 kg (2000 g) when used with supplementary masses. The listing does not give the capacity of the beams alone, so ask JLab if you need that figure.
What does the full tare beam do?
It carries a poise that slides and rotates for fine adjustment, so the mass of a container can be balanced out before weighing and the beams then show the net mass of the sample.
Are the supplementary masses supplied with the balance?
The listing does not say. State in your enquiry whether you need them, and JLab will include them in the quotation if required.
How is the balance zeroed?
A spring-loaded zero-adjust compensator sets the pointer to zero with the pan empty and the poises at zero, before any weighing starts.
How does it differ from a triple beam balance?
Both are mechanical beam balances. This model uses double beams plus a tare beam and reaches 2 kg with supplementary masses; JLab’s Triple Beam Balance (0-2610gm) uses three beams for 610 g and extends to 2610 g with added weights.
What information is needed for an export quotation?
Send the quantity, whether supplementary masses are needed, the destination country and port or city, delivery terms such as FOB or CIF, packing or labelling requirements, and the tender reference if applicable.
Who manufactures this double beam balance?
Jain Laboratory Instruments Pvt Ltd, trading as JLab, makes it at its works in Ambala, Haryana, India, and quotes for it as the manufacturer.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a manufacturer of laboratory balances and school science equipment in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. This balance is made in JLab’s own works and not bought in from a trader, so schools, colleges, dealers and importers buy straight from the maker, each balance is visually inspected before dispatch, and repeat orders come back to the same works. JLab exports worldwide and ships to buyers in every region — for example Romania in Eastern Europe, Panama in Central America and the Caribbean, Cameroon in Central Africa, Canada in North America and Nigeria in West Africa. Tender details are on the JLab lab tenders page.
Other Balances and Weights
- Double Beam Balance — a two-pan model with magnetic damping and listed accessories.
- Double Beam Balance — a two-pan model with centre-reading sliding masses.
- Triple Beam Balance (0-2610gm) — a single-pan, low-form balance with three beams.
- Weighing Mass Set on Tray — steel and brass weights housed in a moulded tray.
- Equal Arm Beam Balance — an aluminium-beam balance on agate bearings for teaching.
See the full School Lab Equipment range.
Request a Quote
Quotes come direct from the manufacturer. Use the Add To Cart enquiry button on this page, or send the quantity (minimum 10 units), whether you need supplementary masses, and your delivery location through the contact page.
Last updated: 4 October 2026
