Electricity Lab Manufacturer,Supplier and Exporter in India
Product Code : EL-BT-1493
Jlab Export is a leading Electricity Lab Manufacturer,and suppliers in India
Electricity Lab (code EL-BT-1493) is a bench electricity trainer for basic circuit experiments, from electricity produced by chemical action, heat and magnets to Ohm’s law, Kirchhoff’s laws, power measurement and fuses. It has five meters, several supply outputs, switches, a relay, a buzzer/electric bell, a transformer and 6 V bulbs for building the circuits. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Experiment coverage | Electricity by chemical action; electricity by heat; electricity by magnets; conductors and insulators; resistor colour code; resistors in series, in parallel and in series-parallel combination; Ohm’s law and applying Ohm’s law; Kirchhoff’s current law (junction rule); Kirchhoff’s voltage law (loop rule); linear and non-linear resistance; measurement of power; AC and DC power; fuses and circuit breakers; heating effect and the fuse; loads in series and parallel circuits; cell connections; voltage and current in series and parallel circuits |
| Meters | Five |
| AC voltmeter | 15 V |
| DC voltmeter | 15 V |
| Galvanometer | ±250 µA |
| DC ammeters | 0.6 A and 5 A |
| Power supplies | 3, 6 and 12 V at 3.5 A |
| AC power supply | 30 V at 1 A |
| DC power supply | 5 V at 100 mA |
| Switches | SPDT switch, DPDT switch and push switch |
| Logic switches | Two, push type |
| Relay | 12 V DC, one changeover |
| Sounder | Buzzer/electric bell |
| Transformer | Input 6-0-6 V, output 6-0-6 V |
| Bulbs | Three, 6 V |
| Quality check | Each trainer is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-BT-1493 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with Other JLab Electricity Trainers?
| Model | Supplies | Meters | Experiment focus |
|---|---|---|---|
| This trainer (EL-BT-1493) | 3, 6 and 12 V at 3.5 A; 30 V AC at 1 A; 5 V DC at 100 mA | Five: 15 V AC and DC voltmeters, ±250 µA galvanometer, 0.6 A and 5 A DC ammeters | Sources of electricity, resistor networks, Ohm’s and Kirchhoff’s laws, power, fuses, cell connections |
| Electricity Trainer | 5 V and 12 V DC at 200 mA; 6 V AC at 1 A | 30-0-30 galvanometer, 80 ohm | Resistances in series and parallel, Oersted experiment, mutual induction, step-up and step-down transformers, galvanometer conversion |
| Ohms Law Series and Parallel Circuits | 0–15 V DC at 100 mA, continuously variable, regulated | 3½-digit DC voltmeter (20 V range) and DC current meter (200 mA range) | Verification of Ohm’s law, series circuits, parallel circuits |
Choose the Electricity Lab when one trainer should take a class from the sources of electricity through resistor networks, Kirchhoff’s laws, power and fuses, with five meters to hand. The Electricity Trainer’s experiments include Oersted’s experiment, mutual induction and transformer construction, while the Ohms Law Series and Parallel Circuits board pairs a variable 0–15 V supply with digital meters for focused Ohm’s-law work.
What Is the Electricity Lab Used For?
The experiment list follows the order in which electricity is usually taught. Students first see that a current can be produced chemically, thermally and magnetically — the centre-zero galvanometer shows these small currents in either direction — then sort conductors from insulators, read resistor colour codes and build series, parallel and mixed resistor networks. Ohm’s law and resistors in series and parallel are class 10 science topics, and Kirchhoff’s junction and loop rules belong to class 12 physics; the same experiments are also part of basic electrical courses at ITIs and polytechnics. Later work covers power in AC and DC circuits, the heating effect of current and why a fuse or circuit breaker protects a circuit, and how cells and loads behave when connected in series and in parallel. A filament lamp is the classic example of a non-linear resistance, set against a fixed resistor that follows Ohm’s law.
What to Specify When Ordering
- Number of trainers — for example one per bench or per student group.
- Other electricity apparatus — Ohm’s law apparatus or another electricity trainer for parallel bench work can be quoted on the same enquiry.
- Delivery — the destination and your preferred delivery terms.
Frequently Asked Questions
What experiments can be done on the Electricity Lab?
The coverage runs from electricity by chemical action, heat and magnets, conductors and insulators and the resistor colour code, through series and parallel resistor circuits, Ohm’s law and Kirchhoff’s current and voltage laws, to power measurement, fuses and circuit breakers, and cell, load, voltage and current behaviour in series and parallel circuits.
What power supplies does the trainer have?
Outputs of 3, 6 and 12 V at 3.5 A, a 30 V AC supply at 1 A and a 5 V DC supply at 100 mA.
Why is the galvanometer marked ±250 µA?
It is a centre-zero meter that reads up to 250 microamperes on either side of zero, so it shows both the size and the direction of the small currents produced in the chemical, heat and magnet experiments.
Which switches and output devices does it have?
An SPDT switch, a DPDT switch, a push switch, two push-type logic switches, a 12 V DC relay with one changeover contact, a buzzer/electric bell and three 6 V bulbs.
What should an export enquiry include?
The number of trainers, the destination country and port or city, delivery terms such as FOB or CIF, any packing or labelling requirements and the tender reference where the purchase is through a tender.
Who manufactures the Electricity Lab?
Jain Laboratory Instruments Pvt Ltd (JLab) builds it at its works in Ambala, Haryana, India, and deals with enquiries for it directly.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a physics and electronics teaching equipment manufacturer in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. The Electricity Lab is produced at JLab’s own works and not bought in from a trader, so schools, colleges, dealers and importers order it straight from the manufacturer, every trainer is visually inspected before dispatch, and repeat orders are handled by the people who build it. JLab exports worldwide and ships to buyers in every region — for example Serbia in Southern Europe, Gabon in Central Africa, the USA in North America, Togo in West Africa and New Zealand in Oceania. For tender purchases, see the JLab lab tenders page.
Other Electricity Apparatus
- Electricity Trainer — includes experiments on converting a galvanometer into a voltmeter and into an ammeter.
- Ohms Law Series and Parallel Circuits — a board with a mains on/off switch, fuse and jewel light and 4 mm stackable patch cords.
- Ohms Law Apparatus JLab — a wire-wound rheostat, moving-coil voltmeter and moving-coil ammeter mounted on a Bakelite plate in a wooden case.
See the complete Breadboard Trainers range or all Electronics Lab Equipments.
Request a Quote
Send your enquiry with the Add To Cart button on this page or through the contact page, stating how many trainers you need, where they are to be delivered and any other apparatus to quote with them.
Last updated: 22 October 2026
