Gas Welding Goggles Manufacturer,Supplier and Exporter in India
Product Code : EL-SWES-8754
Jlab Export is a leading Gas Welding Goggles Manufacturer,and suppliers in India
An oxy-fuel flame and the molten pool under it are too bright to watch with bare eyes. Gas welding goggles carry a shade lens that brings that light down to a comfortable level and guards the eyes against the flame’s radiation. They are worn for gas welding, brazing and flame cutting, and also keep splashes and flying particles out of the eyes.
Specifications
| Lens | Shade lens |
| Used for | Gas welding, brazing and flame cutting |
| Also guards against | Splashes and flying particles |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Gas Welding and Brazing Practicals
Trainees light the torch on the Gas Welding Plant, set a neutral flame and run fusion beads on mild steel sheet, adding filler rod by hand. The goggles go on before the torch is lit and stay on through welding and flame cutting.
Brazing practice, such as joining copper pipe with the Oxyacetylene Gas Welding Kit, uses the same goggles. Teachers can show the class how the shade lens lets the welder see the pool and the end of the rod, where bare eyes would see only glare.
Frequently Asked Questions
Can gas welding goggles be used for arc welding?
No. An electric arc gives off much stronger ultraviolet and visible light than a gas flame, and needs a darker filter that covers the whole face. Use a Welding Shield or welding helmet for stick, TIG and MIG work.
Why not wear clear goggles for gas welding?
A clear lens stops particles but does nothing about the glare and radiation from the flame. These goggles have a shade lens, so the welder can watch the pool through a whole practical without squinting.
How is the right shade chosen?
Lighter shades suit brazing and light gas welding, and darker shades suit heavier welding and the cutting of thick plate. Choose the shade that shows the pool clearly without glare, and check the shade marked on the lens before the class starts.
Do the goggles help during flame cutting?
Yes. Besides cutting the glare, they keep splashes and flying particles out of the eyes, which matters when molten metal is blown out of the cut. Wear them with leather gloves and an apron for cutting work.
How should the goggles be looked after?
Keep the lens clean and free of spatter, and store the goggles away from the hot work area between classes. A pair with a cracked or heavily pitted lens should not be used, because it no longer gives a clear view of the pool.
Other Gas Welding Gear and Safety Wear
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
