Home » Our Product » Mechanical Engineering Lab Equipment » Automobile Engineering Lab Equipments » Oxyacetylene Gas Welding Kit

Oxyacetylene Gas Welding Kit Manufacturer,Supplier and Exporter in India

Product Code : EL-AELE-12916
Jlab Export is a leading Oxyacetylene Gas Welding Kit Manufacturer,and suppliers in India

Two-stage oxygen and acetylene regulators, each with an inlet and an outlet gauge, are the core of this 15-piece gas welding and cutting kit. With them come two hoses, two flashback arrestors, a torch handle with five welding tips, a cutting attachment with its tip, and a flint lighter. The regulators fit cylinders with CGA 540 oxygen and CGA 510 acetylene valves.

Specifications

Kit contents	15 pieces
Oxygen regulator	2-stage, inlet gauge 0–4000 psi, outlet gauge 0–100 psi
Oxygen connections	CGA 540 cylinder inlet, right-hand thread 1/4 in male flare outlet
Acetylene regulator	2-stage, inlet gauge 0–400 psi, outlet gauge 0–30 psi
Acetylene connections	CGA 510 cylinder inlet, left-hand thread 1/4 in male flare outlet
Hoses	2 (oxygen and acetylene)
Torch	1 torch handle with 5 welding nozzle tips
Cutting	1 cutting attachment and 1 cutting nozzle tip
Flashback arrestors	2 (oxygen and acetylene)
Lighter	Flint lighter
Minimum order quantity	10 units
Dispatch time	Usually 4–6 working days
Manufacturer	JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Gas Welding Practicals in the Workshop

Setting up the station is the first practical. Trainees stand an Oxygen Cylinder and an Acetylene Cylinder on a Gas Cylinder Trolley, fit each regulator to its valve and add the flashback arrestors and hoses. They set the outlet pressures and test every joint with leak-test solution. Then they light the acetylene with the flint lighter and add oxygen to reach a neutral flame.

Practice moves on to running beads and butt joints on mild steel sheet at a Welding Workbench, with each trainee wearing Gas Welding Goggles. The five tips let teachers show how tip size is matched to sheet thickness. With the cutting attachment fitted, trainees preheat a steel edge and cut it with the oxygen jet.

Frequently Asked Questions

Why does the acetylene side have a left-hand thread?
So the fuel gas and oxygen connections cannot be mixed up. In this kit the oxygen outlet has a right-hand thread and the acetylene outlet a left-hand thread. The cylinder inlets differ too: CGA 540 for oxygen and CGA 510 for acetylene.

What does a two-stage regulator do?
It brings cylinder pressure down in two steps, so the torch pressure stays steady as the cylinder empties. The inlet gauge shows what is left in the cylinder and the outlet gauge shows the working pressure.

Where do the flashback arrestors go?
Usually on the regulator outlets, one on the oxygen line and one on the acetylene line. They stop a flame running back up the hose towards the regulator and the cylinder.

Why do the two inlet gauges read to such different pressures?
Oxygen is stored as a compressed gas, so its cylinder pressure is high and the inlet gauge reads to 4000 psi. Acetylene is dissolved in acetone inside its cylinder and is held far lower, hence the 400 psi gauge. The outlet gauges, 0 to 100 psi and 0 to 30 psi, show the much lower torch pressures.

Why must oil never touch the oxygen fittings?
Oil and grease can burn violently in contact with pressurised oxygen. Keep the regulators, hose ends and torch valves clean and dry, handle them with clean hands and never lubricate them.

How is this kit different from a complete gas welding plant?
This kit is the regulator and torch side only, with five welding tips. The Gas Welding Plant adds cylinders and a trolley, and the Portable Welding Oxygen/Acetylene Torch Kit carries small cylinders in a tote.