Oxygen Cylinder Manufacturer,Supplier and Exporter in India
Product Code : EL-AELE-12918
Jlab Export is a leading Oxygen Cylinder Manufacturer,and suppliers in India
This steel cylinder stores compressed oxygen for gas welding, brazing and flame cutting. It has a water capacity of 10 litres, a working pressure of 150 bar and a test pressure of 250 bar. Its CGA 540 valve takes an oxygen regulator, and a protective cap covers the valve when the cylinder is moved.
Specifications
| Gas | Oxygen |
| Water capacity | 10 litres |
| Working pressure | 150 bar |
| Test pressure | 250 bar |
| Cylinder valve | CGA 540 |
| Material | Steel |
| Protective cap | Yes |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Practice with Gas Cylinders
Before a first gas welding lesson, trainees learn to identify cylinders by label, colour and valve connection. They take off the cap and open the oxygen valve briefly to blow out dust. Then they fit the oxygen regulator from the Oxyacetylene Gas Welding Kit by hand and tighten it with a spanner.
With the valve opened slowly, they read the contents on the inlet gauge. The joint is checked with Bubble Solution For Leak Detection, a solution made for use with gases that include oxygen. The cylinder then goes on a Gas Cylinder Trolley beside its acetylene partner.
Frequently Asked Questions
What colour is an oxygen cylinder in India?
Industrial oxygen cylinders in India are painted black, and acetylene cylinders maroon. Always read the label and the valve connection as well, since paint alone does not prove what a cylinder holds.
Which regulator fits this cylinder?
An oxygen regulator with a CGA 540 inlet, such as the one in the Oxyacetylene Gas Welding Kit. The CGA 540 connection has a right-hand thread and will not fit an acetylene valve.
What do working pressure and test pressure mean?
Working pressure, 150 bar here, is the pressure the cylinder holds when it is filled for use. Test pressure, 250 bar, is the higher pressure the shell is proved at in a hydraulic test.
How should the cylinder be stored?
Upright and secured, with the cap on, in a dry, ventilated place away from fuel gases, heat and oil. Keep full and empty cylinders apart, and close the valve whenever the cylinder is not in use.
Why must the valve be opened slowly?
A sudden rush of high-pressure oxygen heats the regulator seat and can start a fire inside it. Stand to one side of the regulator and open the valve gently until the gauge settles.
Other Gas Welding Cylinders and Sets
- Acetylene Cylinder (the fuel gas cylinder of the pair)
- Gas Welding Plant
- Portable Welding Oxygen/Acetylene Torch Kit (small cylinders in a tote)
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
