Gas Cylinder Trolley Manufacturer,Supplier and Exporter in India
Product Code : EL-AELE-12917
Jlab Export is a leading Gas Cylinder Trolley Manufacturer,and suppliers in India
A gas cylinder trolley keeps the oxygen and acetylene cylinders of a welding set together, so one person can wheel them round the workshop. This mild steel trolley holds two 10-litre cylinders, one for each gas, and takes them from the store to the welding bay and back.
Specifications
| Holds | Two 10-litre cylinders |
| Gases | Oxygen and acetylene |
| Material | Mild steel |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Cylinder Handling Practicals
Cylinder handling is taught before any flame is lit. Trainees check that each valve is shut and its protective cap is on, then load an Oxygen Cylinder and an Acetylene Cylinder onto the trolley. They tip it back on its wheels and move it to the welding bay without dragging or rolling the cylinders.
At the bay, the cylinders stay upright on the trolley while the regulators of the Oxyacetylene Gas Welding Kit are fitted. At the end of the session, trainees close both cylinder valves, bleed the hoses and wheel the set back to the store.
Frequently Asked Questions
What size cylinders does the trolley take?
Two cylinders of 10 litres each, one oxygen and one acetylene. That matches the Oxygen Cylinder and Acetylene Cylinder in the same range, which both have a 10-litre water capacity.
Can the cylinders stay on the trolley while welding?
Yes, that is the usual way to work with a portable set. Keep the trolley on level ground with the cylinders upright, away from the work and out of the path of sparks.
What should be done before moving the trolley?
Close both cylinder valves and release the pressure in the hoses. For a move outside the workshop, take the regulators off and refit the protective caps.
Why are cylinders never rolled or dragged?
Rolling and dragging damage the valve and the shell, and an acetylene cylinder lying down can let acetone reach the valve. A trolley keeps both cylinders upright while they move.
Where should the hoses run from the trolley to the torch?
Keep them as short as the job allows and route them clear of hot metal, sparks, slag and sharp edges. Do not let them lie under the trolley wheels or across a walkway, and coil any spare length loosely.
Other Gas Welding Workshop Items
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
