Welding Shield Manufacturer,Supplier and Exporter in India
Product Code : EL-SWES-8751
Jlab Export is a leading Welding Shield Manufacturer,and suppliers in India
Made of black plastic with a polycarbonate lens, this welding shield weighs 400 g. It goes between the welder’s face and the arc in stick and TIG welding. The welder watches the weld pool through the lens while the face stays back from the heat, sparks and spatter of the joint.
Specifications
| Body material | Plastic |
| Lens material | Polycarbonate |
| Colour | Black |
| Weight | 400 g |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Arc Welding Practicals for First-Year Students
Trainees learn to strike and hold an arc, then run straight beads on flat plate with the Shielded Metal Arc Welding Machine. The shield is in front of the face before the electrode touches the plate and stays there until the arc is out. Slag is then knocked off each bead with a Chipping Hammer.
TIG practice on thin sheet uses the TIG Welding Machine. Here the teacher can point out how the pool looks through the lens as filler rod is added by hand. Students wear Welding Leather Gloves with the shield for every run.
Frequently Asked Questions
What filter shade does a welding shield need?
That depends on the process and the current. Stick and TIG welding at higher currents need a darker filter than low-current work. Before a class, check the shade marked on the filter in the shield and match it to the current the students will use.
How is this shield different from a flip-up or auto-darkening helmet?
This is a plain shield with a plastic body and a polycarbonate lens. The Welding Shield Flip Up Lens Type lets the welder lift the dark lens to inspect the joint. The Auto Variable Welding Helmet darkens by itself as the arc strikes.
Can it be used for gas welding and cutting?
Gas welding, brazing and flame cutting are usually done in goggles with a lighter shade lens, such as the Gas Welding Goggles. An electric arc gives off far stronger ultraviolet light than a gas flame, which is why arc welders cover the whole face.
Does the weight matter for students?
Yes. At 400 g the shield adds little strain over a long practical, so beginners can keep their attention on the pool and a steady arc length.
How should the shield be cared for?
Wipe the lens with a soft, damp cloth and let it dry. Spatter slowly pits polycarbonate, so a shield whose lens is pitted or scratched enough to blur the view should be taken out of use. Store it away from hot work and direct sun.
Other Protective Wear for the Welding Bay
- Welders Apron (split cowhide)
- Leather Welding Jacket
- Mobile Welding Protection Screen
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
