Pipe Welding Clamp Manufacturer,Supplier and Exporter in India
Product Code : EL-SWES-8761
Jlab Export is a leading Pipe Welding Clamp Manufacturer,and suppliers in India
A pipe welding clamp holds two pipe ends, or a pipe and its fitting, steady and in line while the joint is welded and left to cool. This one has an aluminium alloy frame, strong but light to carry, with four self-centering clamps. It has fixed positions for 0, 45 and 90 degrees, needs no adapters and works with tapping tees.
Specifications
| Frame | Aluminium alloy |
| Clamps | Four, self-centering |
| Fixed positions | 0, 45 and 90 degrees |
| Adapters | None needed |
| Fittings | Compatible with tapping tees |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Pipe Jointing Practicals for Plumbing Students
In an ITI plumber course, students first cut plastic pipe square with the pipe cutter supplied with the PPR Welding Machine. Metal pipe is held in a Pipe Vice for cutting so the cut does not wander. The ends are cleaned and marked, then set in the clamp at 0 degrees for a straight joint, or at 45 or 90 degrees for a bend.
The clamp keeps the pipes still while the joint is made and while it cools. Teachers use this to show why a hot joint must not be moved, since a pipe that shifts before it sets ends up crooked. A tapping tee exercise shows how a branch is taken off a main line.
Frequently Asked Questions
What angles can the clamp hold the pipes at?
It has fixed positions for 0, 45 and 90 degrees. Use 0 degrees for a straight run, and 45 or 90 degrees when the joint has to turn a corner or meet an elbow fitting.
What does self-centering mean on a pipe clamp?
The jaws of each clamp close evenly from both sides, so the pipe centre always sits on the centre line of the frame. With four such clamps, two pipes, or a pipe and a fitting, line up on one axis without packing or shims.
Do I need adapters for different jobs?
No adapters are needed. The self-centering clamps grip the pipe directly, so there are no extra parts to fit, store or lose between jobs.
What is a tapping tee, and can this clamp hold one?
A tapping tee is a saddle fitting that sits on a main pipe so a branch line can be taken off it. This clamp is compatible with tapping tees, so the tee and the main pipe are held steady while the fitting is joined.
Why is the frame made of aluminium alloy?
Aluminium alloy keeps the frame strong while making it light to carry and set up. That helps when joints are made in a trench or on site as well as on the training bench.
Other Pipe Work Tools
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
