Ice Plant Trainer Manufacturer,Supplier and Exporter in India
Product Code : EL-RAACL-10087
Jlab Export is a leading Ice Plant Trainer Manufacturer,and suppliers in India
Ice Plant Trainer (code EL-RAACL-10087) is a can-type ice plant for the refrigeration lab: cans of fresh water stand in a tank of circulating brine, a hermetically sealed compressor on R-12 refrigerant cools the brine, and the cold brine freezes the water in the cans. It makes 7 kg of ice in 4 hours. This brine-tank ice plant is built by JLab in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Compressor | Hermetically sealed, R-12 refrigerant |
| Condenser | Air cooled, 4 row |
| Expansion valve | 0.5 TR capacity |
| Evaporator | ½ inch OD copper tube, 75 ft long |
| Filter-drier | Silica gel filled, 3/8 inch flare connections |
| Main tank | 600 × 375 mm, 6.5 inch expanded polystyrene insulation |
| Ice making | 7 kg total ice can capacity; 7 kg in 4 hours |
| Brine stirrer | Motor-driven fan, single phase, 1/10 HP, 1440 rpm |
| Instruments | Digital temperature indicator 0–300 °C, 1 °C least count, Cr/Al thermocouples; single-phase compressor energy meter, 10–20 A; pressure gauges 0–21 and −1 to 10.6 kg/cm², 65 mm dial; digital thermometer; HP/LP cutout and thermostat, both auto reset |
| Services | Floor area 2 × 1.5 m, 1.5 m high; 220 V, 15 A single-phase stabilised supply |
| Quality check | Each trainer is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Product code | EL-RAACL-10087 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
From Brine Tank to Ice Can
The compressor raises the pressure of the refrigerant vapour and sends it to the 4-row air-cooled condenser, where it gives up heat and liquefies. After the filter-drier, the expansion valve drops the pressure, and the liquid boils inside the 75 ft copper evaporator coil in the main tank, taking heat from the brine. The motor-driven stirrer keeps the brine moving past the coil and the cans. Brine is used because it stays liquid below 0 °C.
Readings for the COP Test
Thermocouples on the digital indicator give temperatures around the circuit and the two gauges give the high and low side pressures, so the cycle can be drawn on a pressure–enthalpy chart. The refrigerating effect is the heat taken up in the evaporator, which can be cross-checked from the mass of ice made; dividing it by the compressor work from the energy meter gives the actual COP, for comparison with the theoretical value from the chart. The HP/LP cutout stops the compressor if a pressure goes out of range, and a technical manual comes with the unit.
Other Refrigeration Trainers and a Charging Unit
- Water Cooler Trainer — stored water cooled by an evaporator coil around a stainless steel tank.
- Mechanical Heat Pump Trainer — water-cooled shell and coil condenser and evaporator.
- ICE Plant Tutor — wheel-mounted ice plant model with a stainless steel brine tank.
- Refrigerant Charging Unit — motorised vacuum pump for charging or storing refrigerant.
More cycle trainers are in Refrigeration and Air Conditioning Lab, part of Engineering Lab Equipment.
Request a Quote
Send your order through Add To Cart or the contact page, with the number of trainers and the delivery address.
Last updated: 30 October 2026
