Impact of Jet on Vanes Manufacturer,Supplier and Exporter in India
Product Code : EL-DSO-10350
Jlab Export is a leading Impact of Jet on Vanes Manufacturer,and suppliers in India
Impact of Jet on Vanes (code EL-DSO-10350) is a fluid mechanics bench for verifying the momentum equation experimentally: a water jet is directed onto targets of different shapes and the force it exerts is measured. Pump, sump tank and measuring tank are built into one angle iron frame. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Experiment | To verify the momentum equation experimentally by impact of a jet on different shapes |
| Targets (3) | Hemispherical cup, 100 mm dia.; flat plate, 50 mm dia.; inclined plate, 45 degrees |
| Nozzle | Stainless steel, 10 mm dia., 75 mm long |
| Force measurement | Weighing scale to measure the jet force |
| Jet chamber | Clear acrylic round pipe, 300 mm x 250 mm |
| Measuring tank (flow measurement) | 300 mm x 300 mm x 300 mm |
| Sump tank | 600 mm x 300 mm x 300 mm |
| Tank material | SS 304 sheet |
| Piping and fittings | GI |
| Valves | Gunmetal: 2 for drain, 1 for water control, 1 for bypass |
| Stopwatch | Electronic |
| Pump | 0.5 HP, single phase, 220 V AC +10% |
| Frame | Angle iron, 1280 x 330 x 910 mm, painted |
| Power requirement | 220 V AC +10%, 50 Hz |
| Standard accessories | Power cable and instruction manual |
| Quality check | Each set-up is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-DSO-10350 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with Other JLab Impact of Jet Set-ups?
| Set-up | Targets | Force measurement | Flow measurement |
|---|---|---|---|
| This set-up (EL-DSO-10350) | Hemispherical cup, flat plate and 45-degree inclined plate | Weighing scale | Measuring tank 300 x 300 x 300 mm with electronic stopwatch |
| Impact of Jet on Vanes Apparatus | Brass flat plate and hemispherical cup | Weights added to a weight pan until its mark matches the level gauge | Measuring tank with piezometer, 40 litres; sump 60 litres |
| Impact of Jet on Vanes, spring-loaded stem model | Interchangeable flat plate or hemispherical cup on a spring-loaded stem | Lift of the stem and weight added to the pan | Measuring tank and stopwatch |
Choose this set-up when the practical should include an inclined plate as well as the flat plate and cup, with the force read on a weighing scale; the other two set-ups measure the force with weights on a pan.
What Is the Impact of Jet on Vanes Set-up Used For?
When a jet is deflected by a surface, the change in its momentum produces a force on that surface. For a jet of area a and velocity V striking a flat plate squarely, the momentum equation predicts a force of ρaV²; a hemispherical cup, which turns the jet back on itself, ideally doubles that to 2ρaV², while a plate inclined to the jet receives a smaller normal force, ρaV² sin θ. Students find V from the flow rate measured with the tank and stopwatch, compare the predicted force with the measured one for each target, and so test the momentum principle that underlies turbines and jet propulsion. It is a standard practical in the fluid mechanics labs of civil and mechanical engineering courses and polytechnics.
What to Specify When Ordering
- Number of set-ups for the fluid mechanics lab.
- Electrical supply — the pump runs on single-phase 220 V AC, 50 Hz.
- Companion fluid mechanics rigs, such as the venturimeter or orifice set-ups linked below, which are separate items.
Frequently Asked Questions
Which targets come with the set-up?
Three: a hemispherical cup of 100 mm diameter, a flat plate of 50 mm diameter and a plate inclined at 45 degrees.
How are the force and flow rate measured?
The jet force is read on a weighing scale. Flow is measured by collecting water in the measuring tank against the electronic stopwatch.
What materials are used?
The tanks are made of SS 304 sheet, the nozzle is stainless steel, the piping and fittings are GI, the valves are gunmetal and the jet chamber is a clear acrylic pipe.
How much space does it need?
The angle iron frame that carries the whole set-up measures 1280 x 330 x 910 mm.
What should an export enquiry include?
The number of set-ups, the destination country and port or city, the delivery terms you prefer (for example FOB or CIF), any packing or labelling requirements and the tender reference, if any.
Who manufactures this set-up?
JLab, the trading name of Jain Laboratory Instruments Pvt Ltd, builds it at its works in Ambala, Haryana, and quotes directly as the manufacturer.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a manufacturer of engineering laboratory equipment in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. The set-up is fabricated at JLab’s own works rather than bought from a trader, so engineering colleges, polytechnics, dealers and importers order it factory-direct, each unit is visually inspected before dispatch, and repeat orders are handled by the maker. JLab exports worldwide and ships to buyers in every region — for example Madagascar in East Africa, Chad in Central Africa, Paraguay in South America, Nepal in South Asia and Mexico in North America. Tender details are on the JLab lab tenders page.
Related Fluid Mechanics Equipment
- Impact of Jet on Vanes Apparatus — brass flat plate and hemispherical cup targets, force read with weights and a level gauge.
- Impact of Jet on Vanes, spring-loaded stem model — interchangeable targets on a spring-loaded stem in a visible test enclosure.
- Venturimeter Test Rig — a clear acrylic venturimeter with a U-tube differential manometer, for finding its coefficient of discharge.
- Flow Through Orifice and Mouthpiece — acrylic orifices and mouthpieces with a constant head tank, for the coefficients of discharge, velocity and contraction.
See the full Fluid Mechanics and Hydraulics Lab Equipment range.
Request a Quote
Use the Add To Cart button on this page or the contact page to ask for a quotation, with the number of set-ups, any companion rigs and the delivery city and country.
Last updated: 22 October 2026
