Juice Dispenser Manufacturer,Supplier and Exporter in India
Product Code : EL-RACLE-12806
Jlab Export is a leading Juice Dispenser Manufacturer,and suppliers in India
This chilled juice dispenser holds non-carbonated drinks in 15 litre polycarbonate bowls and keeps them moving with an impeller. Mixing is controlled separately for each bowl, so pulp and syrup do not settle. It takes syrup-based and watery juices, cold teas and milky drinks, comes apart quickly for cleaning, and runs on 220 V, 50 Hz.
Specifications
| Capacity | 15 litres per bowl |
| Bowls | Shock proof polycarbonate |
| Mixing | Impeller with independent mixing control |
| Drinks | Non-carbonated: syrup-based and watery juices, cold teas, milky drinks |
| Cleaning | Quick to dismantle and clean |
| Power supply | 220 V, 50 Hz |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Lab Exercises on the Juice Dispenser
A cooling-rate experiment works well on this unit. Students fill a bowl with 15 litres of water, record its starting temperature with a Digital Stem Thermometer and log it at fixed intervals as the dispenser runs. From the mass of water, its specific heat and the temperature drop, they work out the heat removed and the average cooling rate in watts.
Appliance repair trainees then check the electrical side. They measure the running current of the compressor and the mixing motor with the Digital Clamp Meter, test the thermostat, and clean the condenser. Stripping and refitting the bowls is a good lesson in food-contact hygiene.
Frequently Asked Questions
Which drinks can the juice dispenser hold?
It is made for non-carbonated drinks. Syrup-based and watery juices both work, and with its impeller it also handles cold teas and milky drinks. Fizzy drinks need a carbonated machine such as the Beverage Dispenser.
Why does the tap drip after cleaning?
A dripping tap usually has a seal that is dirty, worn or fitted the wrong way after the parts were washed. Take the tap apart, clean and refit the seal, and change it if it is cracked or flattened. Then fill the bowl with water and check before adding juice.
Why does the drink need stirring?
Juices with pulp or syrup separate when they stand, and milky drinks can form a layer. The impeller keeps the drink moving, so it stays even and cools at the same rate throughout the bowl.
How is the dispenser cleaned?
It is quick to dismantle. Empty the bowl, take off the removable parts, wash them in warm water with a mild detergent, then rinse and refit. Avoid abrasive pads, because they scratch polycarbonate.
Why does the juice come out warm?
The cooling cannot keep up. Common causes are a dusty condenser, a blocked air path around the cabinet, a bowl filled with warm juice, or a unit switched on shortly before service. Keep the condenser clean, leave space around the cabinet and fill with chilled juice where you can.
Other Drink and Cold Storage Equipment
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
