Axial Flow Condenser Fans Manufacturer,Supplier and Exporter in India
Product Code : EL-RACLE-12819
Jlab Export is a leading Axial Flow Condenser Fans Manufacturer,and suppliers in India
Air moves straight through an axial flow fan, along the line of its shaft, which suits blowing air through a flat condenser coil. This model is rated 15 W, has an aluminium body and runs on 220-240 V, 50 Hz.
Specifications
| Fan type | Axial flow |
| Wattage | 15 W |
| Body | Aluminium |
| Supply | 220–240 V, 50 Hz |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Airflow Experiments with an Axial Fan
Students can find the airflow a condenser fan delivers with a simple traverse. They fix the fan to a test coil or short duct and take air velocity readings at several points across the face with a Handheld Anemometer Digital. The average velocity multiplied by the face area gives the volume of air moved.
Next, students run this 15 W fan and then the 12 W model of the Axial Flow Condenser Fans on the same coil. The two results show how fan power changes the airflow. Comparing each result with the rated wattage tells students how much air each fan moves per watt.
Frequently Asked Questions
What is an axial flow fan?
In an axial fan the air enters and leaves along the line of the shaft, as with a table fan. It moves a large volume of air against low resistance, which is what a condenser coil calls for.
How do I measure the airflow it gives?
Measure the air velocity at several points over the coil face with an anemometer, take the average and multiply it by the face area. The result is the volume of air passing through the coil each second or minute.
What is the difference between the 15 W and 12 W models?
Both have an aluminium body and run on 220-240 V, 50 Hz. This model is rated 15 W and the other 12 W. Fit the rating of the fan being replaced, since fan power is matched to the coil and cabinet.
Why does a replacement fan turn slowly?
Check the supply voltage at the fan, then check that the blade does not rub the shroud and is tight on the shaft. A fan rated lower than the old one, or a blade of the wrong size, also gives weak airflow. Match the wattage and the 220 to 240 V supply when replacing.
Other Condenser and Evaporator Fans
- Condenser Fan (aluminium blade)
- Evaporator Fan
- Fan Cooled Condenser
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
