Universal AC Board Manufacturer,Supplier and Exporter in India
Product Code : EL-RACLE-12828
Jlab Export is a leading Universal AC Board Manufacturer,and suppliers in India
A universal AC board replaces the original control board of a split air conditioner when that board fails. This one is single-sided, works on 180–230 V AC at 50 Hz and is packed in a box with its own remote control. Service technicians keep it as a stock spare, and RAC instructors use it for board-change practice.
Specifications
| For | Split air conditioners |
| Power supply | AC 180–230 V, 50 Hz |
| Board type | Single-sided |
| Temperature range | 10–30 °C |
| Remote control | Included |
| Packing | Box |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Practice: Replacing an AC Board
On a split unit such as the Split Air-Conditioner, which comes with replacement indoor and outdoor boards, students first label every wire on the old indoor board. They switch off and unplug the unit, take the old board out and mount the universal one in its place.
The loads are reconnected one at a time and checked against their labels. When power is restored, students read the supply at the board with a Digital Multimeter to confirm it is within 180–230 V. They then run the unit from the remote through each mode and note the compressor current on a 3-3/4 Digit General Purpose Clamp Meter.
Frequently Asked Questions
Will this board work with my split AC?
It is made for split air conditioners on a 180–230 V, 50 Hz supply. Before ordering, list what the old board drives, such as the compressor, fans and louvre motor. Then check that the universal board can take each of those loads.
Is a remote control included?
Yes. The board comes boxed with its own remote. Use that remote rather than the old one, because the original remote was coded for the original board and usually will not work with a universal board.
What does single-sided mean on a control board?
The copper tracks run on one face of the circuit board only. That makes the tracks and solder joints easy to follow, which helps when tracing a fault or when students study how the board is laid out.
Should the unit be switched off while the board is changed?
Yes. Switch off and unplug the air conditioner, then wait a few minutes for the capacitors to discharge before touching any wiring. Restore power only after every connection has been checked and the board is fixed in place.
Other Spares for Split AC Service
- Four Way Valve
- Condensate Removal Pump
- Hard Start Kit
- Capacitors (run capacitor)
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026