Shock Absorbers Manufacturer,Supplier and Exporter in India
Product Code : EL-RACLE-12832
Jlab Export is a leading Shock Absorbers Manufacturer,and suppliers in India
These rubber vibration mounts go under a compressor, condensing unit or motor and stop its vibration passing into the frame or wall bracket. They have an M8 thread and a load range of 19–90 kg. The metal and rubber parts are bonded together into one piece, and the elastic rubber takes up the shaking of a running machine.
Specifications
| Type | Rubber vibration mount |
| Thread | M8 |
| Load range | 19–90 kg |
| Construction | Metal and rubber bonded together |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Practice: Mounting a Compressor
When a compressor or condensing unit is fixed to a trainer base, students fit one mount under each foot and bolt it down on the M8 thread. They tighten the nuts with an Analog Torque Wrench fitted with its adjustable spanner head, stopping before the rubber bulges.
To see the effect, the class runs the unit first on solid packing and then on the mounts. A Digital Sound Level Meter held at a fixed distance records the noise in each case, while students feel the frame and pipework for vibration. The readings show how much the rubber takes out.
Frequently Asked Questions
Where are shock absorbers used in refrigeration and AC work?
Under compressors, condensing units, fan motors and pumps, wherever a running machine is bolted to a frame, bracket or cabinet. The rubber takes up the vibration, so less of it reaches the structure and the brazed pipe joints.
How do I choose the right mount?
Check the thread and the load. These mounts have an M8 thread and a 19–90 kg load range. Share the machine’s weight across all its feet and check the share each mount carries against that range.
How tight should the mounting nut be?
Tighten until the machine sits firmly without rocking, then stop before the rubber squeezes out at the sides. An over-tightened mount turns solid and passes vibration straight to the frame.
When should the mounts be replaced?
Replace them when the rubber cracks, turns hard, swells with oil or starts to part from the metal. Change every mount under a machine at the same time so that it still sits level.
Other Vibration and Mounting Parts
- Vibration Dampers (for a 1/2 HP compressor outlet)
- Anchor Bolt (M10 and M12)
- Levels (magnetic box level)
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026