Model Steering Jeep With Stub Axle Manufacturer,Supplier and Exporter in India
Product Code : EL-AELE-9412
Jlab Export is a leading Model Steering Jeep With Stub Axle Manufacturer,and suppliers in India
The steering of a jeep is laid out on this model so that students can follow every link from the steering wheel to the front stub axles. It is built from original used parts, sectioned and arranged to show the steering gear box, bell assembly, tie rod, linkages and stub axle. Turning the steering wheel shows the system working.
Specifications
| Built from | Original used parts, sectioned and arranged |
| Parts shown | Steering gear box, bell assembly, tie rod, linkages, stub axle |
| Operation | By the steering wheel provided |
| Finish | Painted |
| Mounting | Sturdy iron frame |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
From Steering Wheel to Stub Axle
The steering gear box turns the rotation of the steering wheel into a swing of its output arm. Its large reduction means little effort is needed at the rim. In a jeep layout the movement then passes through the linkages and the bell assembly to the tie rod. The tie rod moves the steering arms on both stub axles together.
Each stub axle carries a front wheel hub and swings on a kingpin at the end of the front axle. The steering arms are angled inwards, so on a turn the inner wheel steers through a larger angle than the outer one. This is the Ackermann principle, and it lets both front wheels roll about one centre on the rear axle line.
Workshop Practice on Steering Systems
Students can name each part from the steering wheel to the stub axle, then turn the wheel from lock to lock and note how each link moves. With a Protractor held over each stub axle, they can measure the inner and outer steering angles at full lock and check the Ackermann effect.
Teachers can then compare steering gear types. The Cut Section Model of Steering Gear Box opens up a worm-type box. The Rack and Pinion Type Steering System shows a pinion driving a toothed rack across the car.
Frequently Asked Questions
What is a stub axle?
It is the short axle on which each front wheel hub turns. It pivots on a kingpin at the end of the front axle. Its steering arm is linked to the tie rod so that both front wheels steer together.
What is the Ackermann principle in steering?
It is the steering geometry that turns the inner front wheel through a larger angle than the outer one. Both wheels then roll about one centre on the line of the rear axle, so the tyres go round a bend without side slip.
What types of stub axle are taught in automobile courses?
The usual textbook types are Elliot, reverse Elliot, Lamoine and reverse Lamoine. They differ in how the stub axle joins the axle beam. The Elliot type has a yoke on the beam, the reverse Elliot a yoke on the stub axle, and the Lamoine types an L-shaped stub axle.
What is kingpin inclination?
It is the inward tilt of the kingpin from the vertical, seen from the front of the vehicle. It brings the steering axis closer to the tyre contact patch, so steering needs less effort. It also lifts the vehicle slightly as the wheels are turned, which helps them return to straight ahead.
Other Steering Systems and Trainers
- Manual Steering System
- Power Steering System
- Steering Geometry and Wheel Alignment Trainer (turn tables, toe and camber gauges)
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
