My Temp Heating and Cooling Incubator Manufacturer,Supplier and Exporter in India
Product Code : EL-LE-8193
Jlab Export is a leading My Temp Heating and Cooling Incubator Manufacturer,and suppliers in India
My Temp Heating and Cooling Incubator (code EL-LE-8193) is a floor-standing 65-litre laboratory incubator that both heats and cools, holding a set temperature from 0 °C to 60 °C for cultures, samples and BOD bottles. A compressor switches on for set points below room temperature, and forced air with a stainless steel interior spreads the heat evenly through the chamber. JLab (Jain Laboratory Instruments Pvt Ltd, Ambala, India) supplies it to schools, colleges and dealers.
Specifications
| Parameter | Detail |
|---|---|
| Product series | My Temp (MyTemp) |
| Temperature range | 0 °C to 60 °C (RT −25 °C to 60 °C) |
| Temperature accuracy | 0.5 °C (at 37 °C) |
| Temperature uniformity | ±1.0 °C (at 37 °C) |
| Temperature increment | 0.1 °C |
| Heating and cooling | Forced air; compressor activates for sub-ambient set points |
| Refrigerant | R134A |
| Chamber | Stainless steel inner construction with internal light |
| Display | Large digital display of chamber temperature and remaining incubation time |
| Shelves | Two adjustable-height shelves supplied; additional shelves sold separately |
| Internal outlet | Built-in, for powering small instruments such as shakers and rockers inside the chamber |
| Capacity | 65 L (2.3 cu ft); 30 BOD bottles of 300 ml |
| Exterior dimensions (W x D x H) | 54 x 53.34 x 99.85 cm (21.25 x 21 x 39.35 in); floor-standing |
| Interior dimensions (W x D x H) | 40 x 32.4 x 50.2 cm (15.75 x 12.75 x 19.75 in) |
| Weight | 53 kg (117 lb) |
| Electrical supply | 120 V, 60 Hz or 230 V, 50 Hz (385 W) |
| Operating ambient temperature | +10 °C to +30 °C |
| Quality check | Each incubator is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-LE-8193 |
| Supplied by | Jain Laboratory Instruments Pvt Ltd (JLab), Ambala, India |
How Does It Compare with Other Incubators JLab Offers?
| Model | Listed temperature range | Capacity | Other listed details |
|---|---|---|---|
| This My Temp incubator (EL-LE-8193) | 0 to 60 °C (RT −25 to 60 °C) | 65 L; 30 BOD bottles | Floor-standing; compressor cooling; forced air; internal outlet; 53 kg |
| MyTemp Mini Digital Incubator | Ambient +1 to 60 °C (H); ambient −15 to 60 °C (HC) | 20 L | Compact; two adjustable shelves; internal outlet; flasks and bottles up to 2 litres |
| My Temp Mini CO2 Digital Incubator | RT −10 to 55 °C | 20 L | CO2 control from 0 to 20%; humidity reservoir; 12 V vehicle power adapter |
| BOD Microbiological Incubator (28oC) | 5 to 50 °C | 100–120 L | Double-wall construction; microprocessor control with digital display; CFC-free refrigeration |
This model is the one to choose when you need a larger heated and cooled chamber, room for 30 BOD bottles, or space to run a small shaker inside. The MyTemp Mini covers lighter loads in 20 litres, the Mini CO2 adds carbon dioxide control for cell culture, and the BOD Microbiological Incubator offers a bigger 100–120 litre chamber.
What Is the Heating and Cooling Incubator Used For?
An incubator keeps cultures and samples in a closed chamber at a steady, chosen temperature. Because this one has a compressor as well as a heater, it can hold set points below room temperature as well as above it, so the same cabinet serves warm incubations and cooler ones. With room for 30 BOD bottles of 300 ml, it also fits biochemical oxygen demand (BOD) testing of water samples, alongside microbiology, cell biology and general incubation work in college, university, water-testing and research laboratories.
The large display shows the chamber temperature and the time left in the run, and an internal light improves visibility inside the chamber. The built-in outlet means a small shaker or rocker can run inside the chamber, so samples can be agitated during incubation. Two adjustable shelves come with the unit and more can be ordered.
What to Specify When Ordering
- Mains supply — 120 V at 60 Hz or 230 V at 50 Hz.
- Extra shelves — beyond the two supplied, if you plan to load bottles or plates on more levels.
- Quantity — the number of incubators, plus any shaker, rocker or other items to be quoted on the same enquiry.
Frequently Asked Questions
What is the My Temp Heating and Cooling Incubator used for?
It incubates cultures, samples and BOD bottles at a set temperature between 0 °C and 60 °C, both above and below room temperature, in a 65-litre floor-standing chamber.
How does it cool below room temperature?
When a sub-ambient temperature is set, a compressor switches on and cools the chamber to the chosen value. The refrigerant is listed as R134A.
How accurate and uniform is the temperature?
Accuracy is 0.5 °C and uniformity ±1.0 °C, both measured at 37 °C, with 0.1 °C setting steps.
How many BOD bottles does it hold?
The chamber takes 30 BOD bottles of 300 ml, within a total capacity of 65 litres.
Can a shaker run inside it?
Yes. A built-in internal outlet powers small instruments such as shakers and rockers placed in the chamber.
How much floor space does it need?
The exterior is 54 x 53.34 x 99.85 cm and it weighs 53 kg, so it is designed to stand on the floor rather than a bench. It should run in a room between +10 °C and +30 °C.
What should an export enquiry include?
Send the quantity, the mains supply, any extra shelves, the destination country and port or city, your preferred delivery terms (for example FOB or CIF), any packing or labelling needs and the tender reference if there is one.
Who supplies the My Temp incubator?
JLab, the trading name of Jain Laboratory Instruments Pvt Ltd in Ambala, Haryana, India, supplies it and quotes for it along with other laboratory equipment.
Supplier
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, incorporated in 2017 and based in Ambala, Haryana, India. As well as building its own laboratory equipment, JLab resells selected instruments such as this My Temp incubator, so a laboratory can buy incubators, shakers and benchware through one supplier. JLab exports worldwide and ships to every region — Belize in Central America and the Caribbean, Bulgaria in Eastern Europe, North Macedonia in Southern Europe, Lithuania in Northern Europe and Kyrgyzstan in Central Asia are examples. Tender details are on the JLab lab tenders page.
Related Incubators and Shakers
- MyTemp Mini Digital Incubator — a compact 20-litre incubator in heating (H) and heating-cooling (HC) versions.
- My Temp Mini CO2 Digital Incubator — a 20-litre incubator with CO2 and humidity control.
- BOD Microbiological Incubator (28oC) — a larger double-walled incubator with refrigeration.
- Incu Shaker Mini with Flat Mat Platform — a compact shaking incubator for flasks, Petri dishes and trays.
Browse Laboratory Equipment or the full Laboratory Supplies range.
Request a Quote
Use the Add To Cart enquiry button on this page or the contact page to ask for a quotation, stating the number of incubators, your mains supply, any extra shelves and the delivery destination.
Last updated: 15 October 2026
