MyTemp Mini Digital Incubator Manufacturer,Supplier and Exporter in India
Product Code : EL-LE-8203
Jlab Export is a leading MyTemp Mini Digital Incubator Manufacturer,and suppliers in India
MyTemp Mini Digital Incubator (code EL-LE-8203) is a compact 20-litre digital incubator for holding cultures and samples at a set temperature on the bench, with a 14.5 x 13 in footprint and room for flasks and bottles up to 2 litres. It comes in a heating version (H, ambient +1 °C to 60 °C) and a heating and cooling version (HC, ambient −15 °C to 60 °C). JLab (Jain Laboratory Instruments Pvt Ltd, Ambala, India) supplies it to schools, colleges and dealers.
Specifications
| Parameter | Detail |
|---|---|
| Product series | MyTemp Mini |
| Versions | H (heating) and HC (heating and cooling) |
| Temperature range | H: ambient +1 °C to 60 °C; HC: ambient −15 °C to 60 °C |
| Temperature accuracy | 0.5 °C (at 37 °C) |
| Temperature uniformity | ±1.5 °C (at 37 °C) |
| Temperature increment | 1 °C |
| Control and display | Digital temperature control; chamber temperature shown in real time on a large LED control panel |
| Shelves | Two adjustable shelves (included) |
| Internal outlet | Included, for powering small shakers, rockers and other instruments inside the chamber |
| Optional accessory | Mini nutating rocker, supplied with flat and dimpled mats, for agitating samples during incubation |
| Capacity | 20 L (0.75 cu ft); flasks and bottles up to 2 litres |
| Exterior dimensions | 33.5 x 37 x 47.5 cm (13.2 x 14.5 x 18.7 in) |
| Interior dimensions | 26 x 23.5 x 32.5 cm (10.3 x 9.3 x 12.8 in) |
| Weight | 6.5 kg (15 lb) |
| Electrical supply | 100 to 240 V, 50–60 Hz |
| Quality check | Each incubator is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-LE-8203 |
| Supplied by | Jain Laboratory Instruments Pvt Ltd (JLab), Ambala, India |
How Does It Compare with the Other My Temp Incubators?
| Model | Listed temperature range | Capacity | What sets it apart |
|---|---|---|---|
| This MyTemp Mini (EL-LE-8203) | Ambient +1 to 60 °C (H); ambient −15 to 60 °C (HC) | 20 L | Compact 14.5 x 13 in footprint; two adjustable shelves; internal outlet for a small shaker or rocker |
| My Temp Mini CO2 Digital Incubator | RT −10 to 55 °C | 20 L | Same exterior size; CO2 control 0–20% with infrared sensor; humidity reservoir; 12 V vehicle adapter |
| My Temp Heating and Cooling Incubator | 0 to 60 °C | 65 L | Floor-standing; compressor cooling; room for 30 BOD bottles |
The MyTemp Mini is the simplest of the three, with digital temperature control and an HC version for work below room temperature. Choose the Mini CO2 if cultures need a carbon dioxide atmosphere, and the floor-standing model if you need more than three times the space.
What Is a Mini Digital Incubator Used For?
An incubator holds samples and cultures in a closed chamber at a steady, chosen temperature. The MyTemp Mini does this in a small cabinet for one bench: you enter the temperature digitally and it heats up — or, on the HC version, cools down — while monitoring the chamber and showing the temperature on its LED panel. It suits microbiology, molecular biology, biochemistry and teaching laboratories at colleges, universities and research institutes.
Two adjustable shelves carry flasks, bottles up to 2 litres and other vessels. The internal outlet powers a small shaker or rocker inside the chamber, and a mini nutating rocker with flat and dimpled mats is available for agitating samples while they incubate.
What to Specify When Ordering
- Version — H (heating, ambient +1 °C to 60 °C) or HC (heating and cooling, ambient −15 °C to 60 °C).
- Rocker — add the mini nutating rocker if samples need agitation during incubation.
- Quantity — the number of incubators, plus any other instruments for the same enquiry.
Frequently Asked Questions
What is the MyTemp Mini Digital Incubator used for?
It keeps cultures and samples at a set temperature in a compact 20-litre chamber, either heating only (H version) or heating and cooling (HC version).
What is the difference between the H and HC versions?
The H version runs from ambient +1 °C to 60 °C. The HC version can also cool, from ambient −15 °C to 60 °C.
How accurate is the temperature?
Accuracy is listed as 0.5 °C and uniformity as ±1.5 °C, both at 37 °C, and the temperature is set in 1 °C increments.
What fits inside?
The 26 x 23.5 x 32.5 cm chamber holds 20 litres, with two adjustable shelves and room for flasks and bottles up to 2 litres.
Can samples be shaken inside it?
Yes. An internal outlet powers small shakers and rockers in the chamber, and a mini nutating rocker with flat and dimpled mats is available.
What power supply does it need?
It runs on 100 to 240 V at 50–60 Hz.
What should an export enquiry include?
Give the version, any rocker, the quantity, the destination country and port or city, the delivery terms you want (for example FOB or CIF), any packing or labelling needs and a tender reference if one applies.
Who supplies the MyTemp Mini?
JLab, the trading name of Jain Laboratory Instruments Pvt Ltd in Ambala, Haryana, India, supplies it and handles the quotation.
Supplier
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a laboratory equipment company in Ambala, Haryana, India, incorporated in 2017. In addition to the equipment it builds itself, JLab resells selected instruments such as the MyTemp Mini incubator, so a lab can order incubators, rockers and benchware from one source. JLab exports worldwide and ships to every region — Ukraine in Eastern Europe, Lesotho in Southern Africa, Lebanon in the Middle East, Sudan in North Africa and Panama in Central America and the Caribbean are examples. Tender buyers can see the JLab lab tenders page.
Related Incubators
- My Temp Mini CO2 Digital Incubator — the same compact body with CO2 and humidity control.
- My Temp Heating and Cooling Incubator — a 65-litre floor-standing incubator with compressor cooling.
- Incu Shaker Mini with Flat Mat Platform — a compact shaking incubator for flasks, Petri dishes and trays.
- My Block Mini Dry Bath — a personal block incubator for tubes.
See more in Laboratory Equipment or across Laboratory Supplies.
Request a Quote
Request a quotation with the Add To Cart button on this page or through the contact page, giving the version (H or HC), whether you need the rocker, the number of units and the delivery destination.
Last updated: 15 October 2026
