My Temp Mini CO2 Digital Incubator Manufacturer,Supplier and Exporter in India
Product Code : EL-LE-8194
Jlab Export is a leading My Temp Mini CO2 Digital Incubator Manufacturer,and suppliers in India
My Temp Mini CO2 Digital Incubator (code EL-LE-8194) is a compact 20-litre CO2 incubator, only 13 inches wide, that controls both temperature and carbon dioxide for cell culture work, small enough to sit inside a biological safety cabinet. A dual-beam infrared sensor monitors the CO2 level from 0 to 20%, and a 12 V vehicle power adapter comes with it for moving cells between sites. JLab (Jain Laboratory Instruments Pvt Ltd, Ambala, India) supplies it to schools, colleges and dealers.
Specifications
| Parameter | Detail |
|---|---|
| Product series | My Temp (myTemp) Mini CO2 |
| Temperature range | RT −10 °C to 55 °C |
| Temperature accuracy | 0.25 °C (at 37 °C) |
| Temperature uniformity | 0.5 °C (at 37 °C) |
| Temperature increment | 0.1 °C |
| CO2 range | 0 to 20% |
| CO2 sensor | Dual-beam infrared |
| CO2 accuracy | 0.1% (at 5%) |
| CO2 alarm | Audible and visual alarms if the CO2 level drops |
| Humidity | 70 to 80%, using the included stainless steel humidity reservoir |
| Controls and display | Temperature and CO2 set digitally and shown in real time on a large LED control panel; Cal function for in-lab calibration of temperature or CO2 |
| Shelves | Two removable, perforated stainless steel shelves (included) |
| Power loss | Holds temperature within 10% of the set value for up to 1 hour after power is disconnected |
| Vehicle power | 12 V vehicle power adapter included, for use in a car, boat or other vehicle |
| Capacity | 20 L (0.7 cu ft); flasks and bottles up to 2 litres |
| Exterior dimensions | 33.5 x 37 x 47.5 cm (13.2 x 14.5 x 18.7 in) |
| Interior dimensions | 26 x 23.5 x 32.5 cm (10.3 x 9.3 x 12.8 in) |
| Weight | 6.5 kg (15 lb) |
| Electrical supply | 100 to 240 V, 50–60 Hz |
| Quality check | Each incubator is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-LE-8194 |
| Supplied by | Jain Laboratory Instruments Pvt Ltd (JLab), Ambala, India |
How Does It Compare with the Other My Temp Incubators?
| Model | Listed temperature range | Capacity | What sets it apart |
|---|---|---|---|
| This Mini CO2 incubator (EL-LE-8194) | RT −10 to 55 °C | 20 L | CO2 control 0–20% with infrared sensor and alarms; humidity reservoir; 12 V vehicle adapter |
| MyTemp Mini Digital Incubator | Ambient +1 to 60 °C (H); ambient −15 to 60 °C (HC) | 20 L | Same exterior size; heating (H) or heating-cooling (HC) versions; internal outlet for small shakers and rockers |
| My Temp Heating and Cooling Incubator | 0 to 60 °C | 65 L | Floor-standing; compressor cooling; room for 30 BOD bottles |
Choose the Mini CO2 when cultures need a controlled carbon dioxide atmosphere or have to travel with power from a vehicle. The MyTemp Mini Digital has the same 20-litre size with heating or heating-cooling versions, and the floor-standing My Temp model gives more than three times the volume.
What Is a Mini CO2 Incubator Used For?
A CO2 incubator holds cultured cells at a set temperature in an atmosphere with a controlled level of carbon dioxide and raised humidity. The CO2 dissolves in bicarbonate-buffered culture media and helps keep their pH steady, while the humidity limits evaporation from open dishes and flasks. This model is used for cell culture in biotechnology, cell biology and life-science research laboratories at universities and institutes.
Its small size lets it work inside a biological safety cabinet to keep sensitive cultures apart, or simply saves bench space. With thick, high-efficiency insulation around the chamber, it holds the temperature within 10% of the set value for up to an hour without power, and with the included 12 V vehicle adapter the incubator can run in a car or boat, which the listing gives for transporting cells. The Cal function lets users calibrate temperature or CO2 in the lab.
What to Specify When Ordering
- Quantity — the number of incubators for your laboratory or project.
- Extra shelves or reservoirs — if you need spares beyond the two shelves and the humidity reservoir that come with it.
- Other instruments — any incubators or shakers from the list below, quoted on the same enquiry.
Frequently Asked Questions
What is the My Temp Mini CO2 Digital Incubator used for?
It incubates cell cultures at a controlled temperature, CO2 level and humidity in a 20-litre chamber small enough to fit inside a biological safety cabinet or travel by vehicle.
How is the CO2 level measured and controlled?
A dual-beam infrared sensor monitors the CO2 continuously. The level is set digitally between 0 and 20%, with a listed accuracy of 0.1% at 5%, and audible and visual alarms sound if it drops.
Can it control humidity?
Yes. Inserting the included stainless steel humidity reservoir raises the humidity in the chamber to between 70 and 80%.
What happens if the power fails?
It holds the temperature within 10% of the set value for up to 1 hour after the power is disconnected.
Can it be used in a vehicle?
Yes. Each unit includes a 12 V vehicle power adapter for running the incubator in a car, boat or similar, for example while transporting cells.
What fits inside?
The 20-litre chamber, 26 x 23.5 x 32.5 cm inside, takes flasks and bottles up to 2 litres on two removable perforated stainless steel shelves.
What should an export enquiry include?
Send the quantity, any spare shelves or reservoirs, the destination country and port or city, the delivery terms you prefer (for example FOB or CIF), any packing or labelling needs and a tender reference if there is one.
Who supplies this CO2 incubator?
JLab, the trading name of Jain Laboratory Instruments Pvt Ltd in Ambala, Haryana, India, supplies it and quotes for it directly.
Supplier
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, an Ambala, Haryana company incorporated in 2017. Alongside the laboratory equipment it builds, JLab resells chosen third-party instruments such as this My Temp Mini CO2 incubator, so cell culture and life-science labs can source them on the same order as their other equipment. JLab exports worldwide and ships to every region — for example Kyrgyzstan in Central Asia, Hong Kong in East Asia, Belgium in Western Europe, Slovakia in Eastern Europe and Norway in Northern Europe. See the JLab lab tenders page for tender buying.
Related Incubators
- MyTemp Mini Digital Incubator — the same compact body, in heating or heating-cooling versions, with an internal outlet.
- My Temp Heating and Cooling Incubator — a 65-litre floor-standing incubator with compressor cooling.
- Incu Shaker Mini with Flat Mat Platform — a compact shaking incubator for flasks, Petri dishes and trays.
- BOD Microbiological Incubator (28oC) — a larger double-walled incubator with refrigeration.
More instruments are in Laboratory Equipment and the wider Laboratory Supplies range.
Request a Quote
Press Add To Cart on this page or use the contact page to request a quotation, with the number of incubators, any spare shelves or reservoirs and where the order should be delivered.
Last updated: 15 October 2026
