B.O.D. Incubator Manufacturer,Supplier and Exporter in India
Product Code : EL-RE-2079
Jlab Export is a leading B.O.D. Incubator Manufacturer,and suppliers in India
A BOD incubator both heats and cools, so it can hold a set temperature below room temperature as well as above it. That is what the biochemical oxygen demand test of a water sample needs. This one has a microprocessor PID controller, a transparent acrylic inner door, removable perforated shelves and six chamber sizes from 65 to 420 litres.
Specifications
| Smaller chambers (W x D x H) | 405 x 405 x 405 mm, 2.4 cu ft, 65 L; 455 x 410 x 610 mm, 4 cu ft, 112 L; 505 x 415 x 830 mm, 6.1 cu ft, 171 L |
| Larger chambers (W x D x H) | 565 x 565 x 865 mm, 10 cu ft, 280 L; 650 x 580 x 900 mm, 12 cu ft, 336 L; 700 x 650 x 900 mm, 15 cu ft, 420 L |
| Temperature control | Microprocessor PID digital indicator-cum-controller |
| Inner chamber | Anodised aluminium or polished stainless steel |
| Shelves | 2 or 3 removable perforated shelves |
| Doors | Outer double-wall door with magnetic gasket and lock; transparent acrylic inner door |
| Exterior | Thick mild steel, white stoving enamel or powder-coated, matt finish |
| Fittings | CO2/air mixer nozzle; internal lighting with 3 fluorescent tubes |
| Optional | Timer 0–24 hours for day-night cycles |
| Power | Automatic voltage stabiliser of 3–5 kVA recommended |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
BOD Test and Other Student Experiments
The BOD test is a standard environmental engineering practical. Students dilute a sewage or river water sample in Volumetric Flasks, Class A Borosilicate Glass Plastic Stopper JLab. They fill BOD bottles and read the starting dissolved oxygen on a Dissolved Oxygen Meter. The bottles are incubated in the dark for the test period, then read again.
BOD is the drop in dissolved oxygen divided by the fraction of sample in the bottle. Students also run a blank of dilution water alone to check that it uses little oxygen. With the lights and the optional day-night timer, the same cabinet serves seed germination studies on moist paper in a Petri Dish (Polypropylene).
Frequently Asked Questions
Why does a BOD incubator need cooling as well as heating?
The BOD test runs at a fixed temperature that is below room temperature in a warm lab for much of the year. A heater-only incubator cannot go below the room, so the BOD incubator adds refrigeration. The PID controller then holds the set point whatever the season.
Should the lights be on during a BOD test?
No. Keep BOD bottles in the dark, because algae in the sample make oxygen by photosynthesis under light and the BOD would read low. Use the fluorescent lights and the optional day-night timer for plant growth and germination work instead.
Which chamber size do I need?
Count the bottles in a full batch, including blanks, seed controls and each dilution, and allow space between them for air to move. The six sizes run from 65 L (2.4 cu ft) to 420 L (15 cu ft), with two or three removable perforated shelves.
Why is a voltage stabiliser recommended?
Swings in mains voltage strain the compressor and upset temperature control. An automatic voltage stabiliser of 3–5 kVA is recommended for this incubator, so the compressor and controller get a steady supply.
What mistakes give poor BOD results?
Air bubbles trapped under the stopper, a dilution so strong or weak that the oxygen drop is hard to read, and skipping the dilution water blank. Opening the outer door often also disturbs the temperature. The acrylic inner door lets you look in without opening the chamber.
Other Incubators and Water Testing Items
- BOD Incubator
- BOD Incubator with Shaker
- Incubator Bacteriological (heating only)
- Dissolved Oxygen Test Kit
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
