• +91-85699-09696

Rectangular Centrifuge Manufacturer,Supplier and Exporter in India

Rectangular Centrifuge

Product Code : EL-RE-2091
Jlab Export is a leading Rectangular Centrifuge Manufacturer,and suppliers in India

With a transparent acrylic top cover over a rectangular body, this centrifuge lets you see the tubes while they spin. It runs at 4000 to 5000 rpm under an electronic solid-state speed regulator and takes 4, 6 or 8 tubes of 15 ml. A timer and a speed meter can be added, each in a manual or digital version.

Specifications

BodyRectangular
Speed4000 to 5000 rpm
Speed controlElectronic solid-state regulator
Top coverTransparent acrylic sheet
Capacity4, 6 or 8 tubes of 15 ml
Optional timerAutomatic timer, manual or digital
Optional speed meterManual or digital
FittingsCord and plug
Minimum order quantity1 unit
Dispatch timeUsually 7–10 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Lab Exercises with the Centrifuge

In semi-micro qualitative analysis, chemistry students spin a precipitate down in a Centrifuge Tube and draw off the clear liquid with Pasteur Pipettes, Plastic for the next group test. Spinning settles a fine precipitate in minutes, where filtering would take much longer.

With the optional timer and speed meter fitted, students can spin the same suspension for the same time at two speeds and compare how compact the pellet is. The results lead into the formula RCF = 1.118 × 10⁻⁵ × r × N² and show why spin settings are written in × g.

Frequently Asked Questions

Can I watch the tubes through the cover?
Yes. The top cover is transparent acrylic sheet, so the spinning tubes stay in view. Keep it closed for the whole run and open it only after the rotor stops. Wipe it with a soft damp cloth, since solvents and abrasive cleaners scratch or cloud acrylic.

Do I need the optional timer and speed meter?
For routine spins the regulator alone is enough. A timer, manual or digital, ends the run automatically when a method gives a fixed time. A speed meter shows the actual rpm, which you need when converting a setting into g force.

Why did a glass tube crack during a run?
Glass tubes crack when they are not made for centrifuging, have scratches or chips, or sit loose in their places. An uneven load adds strain too. Use tubes rated for the speed you run, check each one before loading, and clear out any broken glass before the next run.

What causes vibration during a run?
Usually unequal tubes. Fill opposite tubes to the same level, use tubes of the same type, and add a water-filled balance tube for an odd sample. Stand the centrifuge on a firm, level bench, and stop it at once if it still shakes.

Other Centrifuges and Tubes

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 6 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us