Water Still (Manasty Type) Manufacturer,Supplier and Exporter in India
Product Code : EL-RE-2081
Jlab Export is a leading Water Still (Manasty Type) Manufacturer,and suppliers in India
A water still boils tap water and condenses the steam into distillate, and most dissolved salts stay behind in the boiler. This electric still has a cast stainless-steel vessel and makes distilled water automatically once it is filled and switched on. An automatic device operates if the water vessel runs dry. Two outputs are made, about 3–4 or 5–6 litres per hour.
Specifications
| Vessel | Cast stainless steel |
| Operation | Electric, automatic |
| Low-water device | Operates automatically when the water vessel runs dry |
| Output (approx.) | 3–4 litres per hour or 5–6 litres per hour |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Distilled Water for Lab Practicals
Chemistry and pharmacy practicals use distilled water for standard solutions, buffers and reagents, and for the final rinse of burettes and pipettes before a titration. Students make up standard solutions to the mark in Volumetric Flasks, Class A Borosilicate Glass Plastic Stopper JLab, where tap water would add ions that change the result.
A short class exercise compares the distillate with tap water on a Digital Conductivity Meter. The distilled sample reads far lower, which shows that distillation leaves the dissolved ions in the boiler. Students can also time how long the still takes to fill one of the Plastic Foot Measuring Cylinders Soda Glass Class B JLab and work out its hourly output.
Frequently Asked Questions
Which output should I choose, 3–4 or 5–6 litres per hour?
Work out the daily need first. A teaching lab that makes up reagents and rinses glassware is usually served by the 3–4 litre per hour model. Busier labs, or labs that also top up water baths and autoclaves, may want 5–6 litres per hour.
What happens if the vessel runs dry?
The still has an automatic device that operates when the water vessel gets dry, so it does not keep running empty. Refill the vessel before you switch on again, and keep the feed water steady to avoid repeated stops.
How do I deal with scale in the vessel?
Hard feed water leaves a white scale of calcium and magnesium salts in the boiler. Drain the vessel after use, descale it at regular intervals with a mild acid descaler, rinse it well and run the first distillate to waste.
How can I check the quality of the distilled water?
Measure its conductivity and compare it with tap water. Good distillate gives a much lower reading. If the reading creeps up over the weeks, clean the still and the storage container before collecting more.
How long can distilled water be stored?
Use it fresh where you can. Water left open takes up carbon dioxide from the air, which lowers its pH and raises its conductivity, and it can pick up dust or film from the container. Keep it in a clean, closed vessel.
Other Water Stills
- Water Still Table Model (double-wall polished stainless steel)
- Water Still Wall Mounting
- Water Still Heavy Duty (free-standing, on a tubular stand)
- Distilled Water
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
