• +91-85699-09696

Hot Air Universal Oven Manufacturer,Supplier and Exporter in India

Hot Air Universal Oven

Product Code : EL-RE-2074
Jlab Export is a leading Hot Air Universal Oven Manufacturer,and suppliers in India

A hot air oven dries washed glassware and samples, and it is used for dry-heat sterilisation of glass and metal items. This universal oven heats from 50 to 250 °C with nichrome elements on three sides for quick, even heating. It has a built-in L-shaped thermometer, a thermostat knob and a switch for high or low heating rates.

Specifications

Temperature range50 to 250 °C
HeatingNichrome wire elements on three sides
Inner chamberAnodised aluminium or polished stainless steel
ExteriorThick mild steel, off-white stove enamel or matt colour finish
ConstructionDouble wall
ThermometerBuilt-in, L-shaped
ControlsHigh/low power selector switch, thermostat knob, mains and thermostat indicators
Supply220 V AC, 50 Hz, single phase, with cord and plug
Also available withAir circulating fan; digital temperature indicator or indicator-cum-controller
Minimum order quantity1 unit
Dispatch timeUsually 14–18 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Microbiology and Chemistry Lab Practicals

Before a microbiology practical, students wrap glass Petri Dish sets and pipettes in paper or foil and sterilise them by dry heat in this oven. Teachers then compare dry heat with moist heat in an Autoclave Vertical, which kills microbes at a lower temperature because steam carries heat far better than dry air.

In chemistry, the oven dries washed glassware and brings precipitates to constant weight in gravimetric analysis. Students heat a Porcelain Crucible with Lid, High Form with its precipitate, cool it in a desiccator and weigh it, repeating until the mass stops changing.

Frequently Asked Questions

Can I sterilise plastic Petri dishes in this oven?
Most plastic dishes will not survive it. Polystyrene softens and melts well below the temperatures used for dry-heat sterilisation. Use dry heat for glassware, metal instruments, powders and oils, and buy plastic dishes pre-sterilised or autoclave the types made for it.

What temperature and time should I use for dry-heat sterilisation?
The oven reaches up to 250 °C. Use the temperature and holding time your lab method or pharmacopoeia sets. Count the holding time from the moment the whole load reaches temperature, not from switch-on, and let the oven cool before you open it.

How should I load the oven?
Leave gaps between items so hot air reaches every surface, and keep the load clear of the heated walls. Wrap glassware in Aluminium Foil Roll or paper and plug tubes loosely with cotton. Paper and cotton scorch if the oven runs too hot.

What do the high and low settings do?
The selector switch sets a high or low rate of power to the elements. High brings the oven up to temperature quickly, and low suits steady holding at gentler settings. The thermostat knob sets the temperature, and the indicators show mains on and thermostat switching.

Should I choose the aluminium or the stainless steel chamber?
Both sit inside the same double-walled body. Anodised aluminium is light and spreads heat well. Polished stainless steel stands up better to spills and corrosive vapours and is easier to wipe clean.

Other Ovens for Drying and Sterilising

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 6 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us