Home » Our Product » Analytical Lab Equipments » Research Equipment » Drying Oven Industrial

Drying Oven Industrial Manufacturer,Supplier and Exporter in India

Product Code : EL-RE-2075
Jlab Export is a leading Drying Oven Industrial Manufacturer,and suppliers in India

This industrial drying oven is a large double-walled cabinet with two doors and a forced-air blower that keeps hot air moving over the load. It measures 900 x 600 x 600 mm. A thermostat controls the temperature, which reads on a dial thermometer and a digital indicator, and a timer covers runs of 0 to 24 hours.

Specifications

Construction	Double walled, double door
Air circulation	Forced air blower
Temperature control	Thermostat
Temperature display	Dial-type thermometer and digital temperature indicator
Timer	0–24 hours
Size	900 x 600 x 600 mm (36 x 24 x 24 in)
Minimum order quantity	1 unit
Dispatch time	Usually 14–18 working days
Manufacturer	JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Pharmaceutics and Engineering Lab Practicals

In a pharmaceutics lab, wet granules for tablets are pressed through Granulating Sieves, spread on trays and dried in the moving hot air. Students take small portions at set times, weigh them on an Electronic Balance Analytical and follow the loss on drying until the granules reach the target moisture.

Civil and soil engineering students dry soil and aggregate samples to constant mass to find their moisture content. They weigh each sample wet in an Evaporating Dish Porcelain, dry it overnight on the timer and weigh it again. The water lost is given as a percentage of the dry mass.

Frequently Asked Questions

Why does a forced-air blower dry faster than a still-air oven?
Moving air carries moisture away from the surface of the load and spreads heat through the cabinet. In still air a damp layer builds up over wet material and slows drying. The blower also evens out the temperature between the top and bottom of the chamber.

How should the load be arranged?
Spread material in thin, even layers on trays or dishes, leave space between them for the air path, and keep the blower openings clear. Dry similar materials together, so one wet batch does not slow the drying of another.

What is the timer for?
It sets the run length from 0 to 24 hours, so long and overnight runs can be timed. Check that drying is complete by weighing a sample: two weighings that agree mean the material is dry.

How is the temperature set and read?
Set it on the thermostat and read it on the dial thermometer or the digital indicator. For critical work, check the temperature at the load with a separate thermometer, since air near the blower can differ from air around the load.

How is it different from the Hot Air Universal Oven?
This is a larger, double-door cabinet with a forced-air blower and a timer, made for bulk drying. The Hot Air Universal Oven is a general lab oven with elements on three sides and a high/low switch, used for glassware and dry-heat sterilisation.