Socket With Ratchet Handle Set Manufacturer,Supplier and Exporter in India
Product Code : EL-WT-12957
Jlab Export is a leading Socket With Ratchet Handle Set Manufacturer,and suppliers in India
Metric sockets from 6 to 22 mm and inch sockets from 1/4 to 7/8 in share one fitted case. With them come a ratchet handle, a sliding T-handle and the bars and joints that reach awkward nuts. Two spark plug sockets, for M10 and M14 plugs, bring the set to 41 pieces. The case has a security padlock hole.
Specifications
| Pieces | 41 |
| Metric sockets | 6–22 mm, 17 pieces |
| Inch sockets | 1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8 in (12 pieces) |
| Spark plug sockets | M10 and M14 |
| Handles | Ratchet handle, sliding T-handle |
| Extensions and joint | 75 mm and 150 mm extension bars, 150 mm wobble extension, universal joint |
| Adaptors | 1/4 in and 1/2 in male adaptors, 1/4 in hexagonal coupler |
| Case | Fitted case with security padlock hole and cushion grip handle |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Motor Vehicle Workshop Exercises
In a motor vehicle trade practical, trainees remove the spark plugs from a petrol engine with the spark plug socket and an extension bar. They check each plug gap with the Feeler Gauge. Then they fit the Cylinder Compression Tester for Petrol Engine into the plug hole and crank the engine to read each cylinder.
When refitting, they run each plug in by hand first so the thread starts straight, then tighten it with the ratchet. Bench work on a gearbox or a pump teaches when to use the universal joint, the wobble extension or the T-handle. Nuts that need a set torque are finished with the Analog Torque Wrench.
Frequently Asked Questions
Which way does the ratchet tighten and loosen?
A ratchet drives one way and clicks freely on the return stroke, so the socket stays on the nut. Set it to drive clockwise, seen from the handle side, to tighten a normal right-hand thread, and anticlockwise to loosen it. Make a short test turn before putting weight on the handle.
Why does the set have both metric and inch sockets?
Machines and vehicles use metric or inch fasteners, and a socket from the wrong system can be loose enough to round off a nut. With 17 metric sizes from 6 to 22 mm and 12 inch sizes from 1/4 to 7/8 in, the set covers both.
What are the spark plug sockets for?
They fit the hex of spark plugs with M10 and M14 threads. A spark plug socket is deeper than an ordinary socket, so it clears the plug insulator and reaches down into the plug well of the cylinder head.
What do the wobble extension and universal joint do?
The universal joint lets the drive turn through an angle when the handle cannot line up with the nut. The 150 mm wobble extension allows a smaller tilt at the socket end while still driving. The 75 mm and 150 mm straight bars add reach to nuts set below a surface.
What are the male adaptors for?
The 1/4 in and 1/2 in male adaptors change the drive size, so a handle and a socket with different drive sizes can work together. Push each adaptor fully home before turning, so it does not slip out under load.
Other Spanners, Keys and Wrenches
- Combination Spanner Set (nine inch sizes)
- Ratchet Wrench (hexagonal and square openings)
- Hex Key Set (extra-long arm hex keys)
- Digital Torque Wrench (presets with LED indicator)
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
