Thermostats 3 Manufacturer,Supplier and Exporter in India
Product Code : EL-RACLE-12831
Jlab Export is a leading Thermostats 3 Manufacturer,and suppliers in India
This freezer thermostat works in the -23 to -10 °C band of a freezing compartment, set by an adjustable temperature dial. Besides freezers, it controls fridges, display cabinets, congealers and beverage coolers. It stops the compressor when its sensing tube is cold enough and starts it again as the compartment warms.
Specifications
| Control range | -23 to -10 °C (freezing compartment) |
| Adjustment | Temperature dial |
| Used in | Fridges, freezers, display cabinets, congealers, beverage coolers |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Freezer Thermostat Practicals
An ice and salt bath reaches only part of this band, so the thermostat is tested on a working system. Students fit its sensing tube to the evaporator of a Basic Modular Refrigeration System Trainer and wire the contacts into the compressor feed.
A Digital Stem Thermometer in the compartment records the temperature at each switching point. Turning the dial one step at a time, the class plots dial position against the measured cut-out. They can repeat the run with the bottle cooler model, Thermostats 2, to see how a warmer range changes the cycle.
Frequently Asked Questions
What temperature range does this thermostat control?
It controls a freezing compartment between -23 and -10 °C. Turn the dial towards the cold end for deep frozen storage, or towards the warm end where goods only need to stay frozen near -10 °C.
Can it be used in a display cabinet or beverage cooler?
Yes. The same thermostat is used on fridges, freezers, display cabinets, congealers and beverage coolers. Choose the dial position for the temperature that cabinet needs, and fit the sensing tube where the original one was clamped.
Why does the compressor keep running without cutting out?
Either the dial is set colder than the system can reach, or the sensing tube has moved away from the evaporator and senses warmer air. Try a warmer setting and refit the tube in its clamp. If the contacts still stay closed when cold, replace the thermostat.
How is it different from the other two thermostats?
Thermostats 1 controls a refrigeration compartment at -5 to 10 °C, and Thermostats 2 a bottle cooler at 2 to 10 °C. This one is the freezer model, set within -23 to -10 °C.
Defrost and Freezer Control Parts
- Defrost Thermostat (fused, sealed in plastic)
- Defrost Heater Glass Tube
- Adjustable Defrost Timer
- Evaporator Fan
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
