Vice Grip Pliers Manufacturer,Supplier and Exporter in India
Product Code : EL-CLE-9085
Jlab Export is a leading Vice Grip Pliers Manufacturer,and suppliers in India
Locking pliers clamp onto a part and stay shut by themselves, so the hand that held the part is free for the job. This pair is about 175 mm long with a 32 mm capacity. It has a forged alloy steel jaw, a pressed steel body with a rust resistant finish, and a lever for locking and quick release.
Specifications
| Type | Locking pliers |
| Jaw | Forged alloy steel |
| Body | Pressed steel |
| Capacity | 32 mm |
| Length | Approx. 175 mm |
| Lever | Lock and quick release |
| Finish | Rust resistant |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Practice with Locking Pliers
Students in a fitting shop can clamp two strips of sheet metal together with the pliers. They drill the rivet holes through both with a bit from the Drills sets, then join the strips with the Riveter. The locked jaws keep the holes in line until the first rivet is set.
Teachers can also use the pliers to show how a toggle linkage works. With the jaws on a short bar, students turn the adjusting screw a little at a time. They feel the handles snap over centre with more or less force.
Frequently Asked Questions
How do I set the grip before locking?
Put the part between the jaws and turn the adjusting screw at the end of the handle until the jaws just touch it. Then squeeze the handles together. The toggle links pass their centre point and the jaws stay locked. For a firmer grip, turn the screw in a little and squeeze again.
How do I open them again?
Press the quick release lever. It pushes the toggle back across its centre line, the jaws open and the part comes free. The screw keeps its setting, so the next part of the same size locks at once.
What size of part will they hold?
The capacity is 32 mm, so they take flat strip, small sections and round bar up to that size. For thin sheet the adjusting screw is turned well in, and for thicker work it is backed out.
Can locking pliers do the job of a vice?
For holding a small part while it is drilled, riveted or welded, yes, and they can be clamped to the work itself. For heavy filing, sawing or chiselling, use the Bench Vice, which grips across a wider jaw and is fixed to the bench.
How should the pliers be looked after?
Wipe off swarf and coolant after use and put a drop of oil on the pivots and the adjusting screw thread. The finish resists rust, and a light film of oil keeps the toggle moving freely.
Other Pliers and Grip Tools
- Groove Joint Pliers (chrome vanadium, for plumbing work)
- Combination Plier (chrome vanadium, insulated handles)
- Curved Jaw Grip Wrench (forged steel, rust protected)
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
