Cabinet With Tools Manufacturer,Supplier and Exporter in India
Product Code : EL-CLE-9102
Jlab Export is a leading Cabinet With Tools Manufacturer,and suppliers in India
This steel tool cabinet is made for an automotive workshop and comes stocked with a set of hand tools. It measures about 1,700 mm wide, 520 mm deep and 1,840 mm high. Upper and lower cabinets have sliding doors and master key locks, and the lower cabinet has six adjustable shelves holding plastic tote trays.
Specifications
| Construction | Steel plate framing |
| Doors | Sliding, on upper and lower cabinets |
| Locks | Master key locks on upper and lower cabinets |
| Overall size | About 1,700 mm (W) x 520 mm (D) x 1,840 mm (H) |
| Lower cabinet | Six adjustable shelves |
| Large tote trays | 8, plastic, about 480 x 380 x 105 mm |
| Small tote trays | 6, plastic, about 320 x 200 x 100 mm |
| Plastic trays | 10, about 335 x 170 x 105 mm |
| Automotive tools included | Brake spring tool (1), starter snap ring tool (1), tyre gauges (2), 6 in pipe wrenches (2), 10 in pipe wrenches (2), lead hammer (1), rubber mallet (1) |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Practice in the Automotive Lab
The tools in the cabinet match routine jobs in a motor vehicle workshop. Students check tyre pressures with the tyre gauges while the tyres are cold, and compare each reading with the figure given by the vehicle maker. On a drum brake assembly they unhook and refit the shoe return springs with the brake spring tool. They can then trace how the shoes are applied on the Model of Drum Brake Unit, which has a sectioned wheel cylinder.
For starter motor work, the battery and starter circuit can be tested first with the Battery Load Tester. When the starter is stripped, the snap ring tool takes off the snap ring that holds the drive pinion on its shaft. The lead hammer and rubber mallet free and seat parts without marking them, and wheel nuts are finished with a Torque Wrench.
Frequently Asked Questions
Which tools come with the cabinet?
The automotive kit has a brake spring tool, a starter snap ring tool and two tyre gauges. It also has two 6 in and two 10 in pipe wrenches, a lead hammer and a rubber mallet.
Can the shelves be moved?
Yes. The six shelves in the lower cabinet are adjustable, so the spacing can be set to suit the large and small tote trays or taller parts and tools.
How are the cabinets locked?
Both the upper and lower cabinets have master key locks, so the tools can be locked away between practical classes and issued by the lab in-charge.
How much space does the cabinet need?
Allow about 1,700 mm of wall length, 520 mm of depth and 1,840 mm of height. Because the doors slide, no extra floor space is needed in front for doors to swing open.
Why does the kit include a lead hammer and a rubber mallet?
Both have soft faces. Students use them to tap brake drums, hubs, shafts and bearings into or out of place without denting machined surfaces, as a steel hammer would.
Other Automotive Workshop Tools
- Oil Filter Wrench
- Battery Plier
- Pipe Wrench
- Tool Box (steel, with two trays)
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
