Riveter Manufacturer,Supplier and Exporter in India
Product Code : EL-CLE-9099
Jlab Export is a leading Riveter Manufacturer,and suppliers in India
A hand riveter sets blind rivets, which are put in and closed from one side of the work. That makes it the tool for joining sheet and strip where the back of the joint cannot be reached. This one takes standard blind rivets from 3 to 5 mm for general metalwork.
Specifications
| Rivets | Standard blind rivets |
| Rivet sizes | 3 to 5 mm |
| Use | General metalwork shop |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Practice: Riveting Two Plates
In a sheet metal exercise, students mark the rivet pitch along the edge of two plates and dot each centre with the Punch Tool. They clamp the plates together with Vice Grip Pliers, drill through both with a bit from the Drills sets, and set the rivets one by one.
Teachers can set the finished joint beside one closed with solid rivets and a Rivet Set. This shows that solid riveting needs a hammer and access to both sides of the work.
Frequently Asked Questions
How does a blind rivet set?
The rivet has a body with a long mandrel through it. The riveter grips the mandrel and pulls it, which draws its head into the rivet body and swells the tail behind the sheet. The mandrel then snaps off.
What hole size do I drill?
Drill a hole just a little larger than the rivet body, so the rivet slides in without force. A loose hole lets the rivet turn, and a tight one makes it hard to seat flat.
How long should the rivet be?
Choose a rivet whose grip range covers the total thickness of the parts being joined. If it is too short the tail cannot form properly, and if it is too long it bunches up behind the joint.
Which rivets does this riveter take?
It takes standard blind rivets from 3 to 5 mm in diameter. Aluminium rivets suit most light sheet work, while steel rivets need a harder pull on the handles.
How do I take out a blind rivet?
Drill into the head with a drill the same size as the rivet body until the head comes away. Then push the rest through with a pin punch, taking care not to enlarge the hole in the sheet.
Other Riveting Tools
- Riveting Tool (with nose pieces and boxes of rivets)
- Riveting Tool (rivet gun kit in a storage case)
- Rivet Gun
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
