Riveting Tool Manufacturer,Supplier and Exporter in India
Product Code : EL-CLE-9116
Jlab Export is a leading Riveting Tool Manufacturer,and suppliers in India
This hand riveting tool is a blind riveter worked by squeezing its two handles. It comes in a closeable plastic case with five boxes of 50 rivets, in sizes including 1/8, 5/32 and 3/16 inch diameter. Interchangeable nose pieces suit each rivet size, and the riveter joins material up to 5/8 inch thick.
Specifications
| Use | Riveting metal, wood, masonry and plastic laminate |
| Rivets supplied | 5 boxes of 50 |
| Rivet diameters included | 1/8, 5/32 and 3/16 in |
| Nose pieces | Interchangeable, to suit the rivet diameter |
| Working thickness | Up to 5/8 in |
| Case | Closeable plastic storage case |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Practice: Joining Sheet with Blind Rivets
A sheet metal exercise such as riveting the corner of a small tray shows where blind rivets are used. Students mark the rivet line, drill holes just over the rivet diameter with the Drills set and hold the sheets together with Vice Grip Pliers. They fit the nose piece that matches the rivet, push the rivet through and squeeze the handles until the mandrel snaps off.
Teachers can have the same joint made with solid rivets, drawn up with the Rivet Set. Students then see the difference: a blind rivet needs access from one side only, while a solid rivet needs both. Cutting the joints open afterwards shows how each rivet has formed.
Frequently Asked Questions
How do I choose the right nose piece?
Fit the nose piece that matches the rivet diameter, so the mandrel passes through it with little play. A loose fit lets the jaws slip on the mandrel, and a tight one will not accept the rivet.
What size hole should be drilled?
Drill the hole just over the rivet diameter, so the rivet slides in by hand. If the hole is too big, the joint can move and the rivet head may pull through the sheet.
What does the 5/8 inch working thickness mean?
It is the greatest total thickness of material the riveter is meant to join. Choose a rivet long enough to pass through every layer and leave enough shank on the far side to form the closed head.
Which materials can be riveted?
The tool is used on metal, wood, masonry and plastic laminate. On soft or brittle material, put a backing washer on the blind side so the closed rivet has more to grip.
Why use blind rivets instead of solid rivets?
Blind rivets are set from the front, so they suit box sections, panels and tubes where the back cannot be reached. Solid rivets need a tool on both sides and are used for heavier plate joints.
More Tools for Riveted Joints
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
