• +91-85699-09696

Rivet Gun Manufacturer,Supplier and Exporter in India

Rivet Gun

Product Code : EL-PWI-8824
Jlab Export is a leading Rivet Gun Manufacturer,and suppliers in India

Sheet metal and heavy fabric can be fastened with this rivet gun from one side of the work, using blind rivets that the gun pulls tight. The gun is all steel with a black wrinkle finish. A head wrench and three spare rivet heads are stored in its handle, so a change of rivet size takes only a moment.

Specifications

ConstructionAll steel, black wrinkle finish
Rivet heads4, with 3 spare heads stored in the handle
Head wrench1, stored in the handle
Rivets supplied40 aluminium rivets, 10 of each size
Rivet sizes3/32, 1/8, 5/32 and 3/16 in diameter, all 1/4 in long
UsesSheet metal, heavy fabric, ductwork, construction and auto body repair
Minimum order quantity10 units
Dispatch timeUsually 4–6 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Sheet Metal and Duct Joining Practicals

Students cut two strips of Aluminium Sheet, mark the rivet spacing along the overlap and drill holes to suit the rivet with a bit from the Drills set. They fit the rivet head that matches the rivet, push the rivet through both strips and squeeze the handles until the stem snaps off.

A duct exercise closes the lap seam of a cylinder rolled on the Slip Roller Machine, where the inside of the seam cannot be reached. Teachers can saw through a set rivet to show how the stem head has swelled the rivet body behind the sheet.

Frequently Asked Questions

Which rivets come with the gun?
The set has 40 aluminium rivets, 10 each in 3/32, 1/8, 5/32 and 3/16 in diameter, all 1/4 in long. Four rivet heads match those sizes, and the head wrench changes them.

What can be joined with these rivets?
Sheet metal and heavy fabric, in jobs such as ductwork, building work and auto body repair. Because the rivet is set from the front, it works on closed sections and duct seams where the back is out of reach.

How do I change the rivet head?
Unscrew the fitted head with the head wrench, take the head for the next rivet size from the store in the handle and screw it in firmly. Use the head whose hole matches the rivet stem, or the stem will slip or jam.

Why are aluminium rivets used for training?
Aluminium rivets set with less hand force than steel ones and do not rust, which suits school and ITI workshops. They also match aluminium sheet, so no second metal is brought into the joint.

How do I avoid a loose rivet?
Drill the hole only just larger than the rivet, clamp the sheets together while setting it and hold the gun square to the work. A tilted gun or an oversize hole lets the rivet set crooked and leaves the joint loose.

Other Riveting Tools

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 6 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us