Vertical Band Saw Manufacturer,Supplier and Exporter in India
Product Code : EL-PWI-8834
Jlab Export is a leading Vertical Band Saw Manufacturer,and suppliers in India
Timber and metal can both be cut on this vertical band saw, because its blade runs in a high and a low speed range. It cuts work up to 12 in high and has an 18 in throat. The 19 x 19 in table tilts, and a 1-3/4 HP single-phase motor drives the blade.
Specifications
| Motor | 1-3/4 HP, 115/230 V, single phase, prewired for 115 V |
| Cutting height | 12 in max. |
| Throat | 18 in max. |
| Rip left of blade, with fence | 16-1/2 in max. |
| Blade length | 137 in (approx.) |
| Blade width | 1/8 to 1-1/2 in (wood), 1/8 to 1 in (metal) |
| Blade speeds | Low 80, 150, 265 SFPM / High 1000, 1800, 3200 SFPM |
| Table | 19 x 19 in, tilts 45° right and 10° left |
| Table height | 37-1/2 in at 90° |
| Weight | 440 lb |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Exercises on the Band Saw
In a carpentry workshop, trainees draw a curved template on a board and cut just outside the line, turning the work slowly so the blade follows the curve. With the fence set they rip strips, and the full cutting height lets them resaw a thick board into thinner ones. Before the first cut, the table is checked at right angles to the blade with an Engineers Square.
In a fitting or sheet metal class, the saw is switched to the low range and fitted with a metal-cutting blade. Trainees scribe an outline on a plate with a Single Ended Scriber and saw to it. They can also learn to rejoin a broken narrow blade on the Band Saw Brazing Machine.
Frequently Asked Questions
Which blade speed should I use for wood and for metal?
Use the high range for timber and the low range for metal. On this saw the high range gives 1000, 1800 and 3200 SFPM and the low range 80, 150 and 265 SFPM. Harder or thicker metal needs the slower settings.
What blade width suits curve cutting?
A narrow blade turns tighter curves, while a wide blade cuts straighter for ripping and resawing. This saw takes blades from 1/8 to 1-1/2 in wide for wood and from 1/8 to 1 in for metal, about 137 in long.
What size of work can it cut?
It cuts stock up to 12 in high. The 18 in throat is the room between the blade and the column, so it sets the widest piece that can pass. With the fence fitted, it rips up to 16-1/2 in to the left of the blade.
Does it need a three-phase supply?
No. The 1-3/4 HP motor runs on a single-phase supply at 115 or 230 V and comes prewired for 115 V. Have an electrician rewire the motor before connecting it to a 230 V supply.
Other Saws for Wood and Metal
- Band Saw Machine
- Horizontal Band Saw Machine
- Circular Saw Machine (table saw for timber)
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
