Nipple Chuck Manufacturer,Supplier and Exporter in India
Product Code : EL-PWI-8825
Jlab Export is a leading Nipple Chuck Manufacturer,and suppliers in India
A pipe nipple is a short piece of pipe threaded at both ends. Once the first end is cut, it is often too short to be held in a machine chuck. A nipple chuck takes the finished thread and holds the short piece so the second end can be threaded. This one holds short and close nipples on power pipe threading machines.
Specifications
| Use | Holds short or close nipples for threading |
| Machine fit | Power threading machines; some need an adapter kit |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Threading Practicals: Making Pipe Nipples
In a plumbing workshop, trainees hold a length of threaded pipe in a Pipe Vice. They cut a short piece from the threaded end with a Hacksaw and file the cut end square. The threaded end goes into the nipple chuck, the chuck is gripped in the threading machine, and the plain end is threaded to match the first.
The finished nipples join two fittings, such as a socket and an elbow, and trainees tighten the run with a Pipe Wrench before a leak test. Teachers use the job to show why a machine chuck cannot hold a piece this short without crushing the thread already cut.
Frequently Asked Questions
What is the difference between a short nipple and a close nipple?
A short nipple has a little plain pipe between its two threads. A close nipple is threaded along its whole length with no plain section. It is the hardest to hold, and the one this chuck is most needed for.
Which threading machines does it fit?
It is made for power pipe threading machines, and some machines need an adapter kit to take it. Send the make and model of your machine with your enquiry so the right fitting can be matched.
Why not hold the nipple in the machine chuck?
The machine chuck needs a length of plain pipe to grip. Once a short piece has one threaded end, too little plain pipe is left, and the jaws would crush the thread already cut. The nipple chuck holds the piece by that thread instead.
How are nipples cut to length?
Measure the finished length including both threads, cut the piece square and remove the burr inside and out. For close nipples, thread a longer pipe first and cut the nipple off its threaded end.
Other Pipe Threading Equipment
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
