• +91-85699-09696

Wood Working Lathe Manufacturer,Supplier and Exporter in India

Wood Working Lathe

Product Code : EL-PWI-8833
Jlab Export is a leading Wood Working Lathe Manufacturer,and suppliers in India

This woodworking lathe is a 15 in mini-lathe for turning small projects in timber. It can serve as a first lathe for a new turner, or as a second, smaller machine in a shop that already has a full-size lathe. Gouges, skews and parting tools cut the spinning wood from a tool rest set close to the work.

Specifications

Lathe typeMini-lathe for wood turning
Size15 in
Suited toA first lathe for new turners, or an added small lathe for experienced ones
Minimum order quantity1 unit
Dispatch timeUsually 14–18 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Workshop Practice on the Mini-Lathe

An ITI or polytechnic carpentry class usually begins with spindle turning. Trainees cut a square blank on the Circular Saw Machine, mark the centre on each end and mount the blank between centres. They rough it to a cylinder with a roughing gouge, then turn beads, coves and a tapered tool handle to a drawing.

Diameters are checked during the cut with outside callipers, and with a Vernier Caliper once the lathe has stopped. A parting tool then cuts the finished piece free. Longer spindle work, such as table legs, moves to the larger Wood Turning Lathe Machine.

Frequently Asked Questions

What can be turned on a mini-lathe?
Small spindle and faceplate work: tool and file handles, pens, candle holders, small bowls and lidded boxes. Long spindles such as table legs or stair balusters need a lathe with a longer bed.

Which turning tools does a beginner need?
A basic set is a roughing gouge, a spindle gouge, a skew chisel and a parting tool, with outside callipers for checking sizes. A bowl gouge is added for faceplate work. Keep the edges sharp, because a blunt tool tears the grain instead of cutting it.

Why does the tool catch and dig in?
A catch happens when the edge meets the wood before the bevel rubs, or when the tool rest sits too far from the work. Keep the rest close, let the bevel rub first and raise the handle slowly until the edge starts to cut.

How should students work safely at the lathe?
Wear a face shield, tie back loose clothing and hair, and set the tool rest close to the work. Turn the blank by hand before switching on to check that it clears the rest. Stop the lathe before moving the rest or taking a measurement.

Other Woodworking Machines

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 6 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us