Strap Wrench Manufacturer,Supplier and Exporter in India
Product Code : EL-PWI-8815
Jlab Export is a leading Strap Wrench Manufacturer,and suppliers in India
A strap wrench turns round work by wrapping a strap around it and pulling the loop tight, instead of biting with toothed jaws. That lets a plumber turn plated, polished or plastic pipe and fittings without marking them. This wrench is made with straps from 425 mm to 1200 mm long and from 12 mm to 45 mm wide.
Specifications
| 425 mm (17 in) strap | 12 mm (1/2 in), 27 mm (1 1/16 in) or 30 mm (1 1/8 in) wide |
| 600 mm (24 in) strap | 30 mm (1 1/8 in) wide |
| 750 mm (29 1/4 in) strap | 45 mm (1 3/4 in) wide |
| 760 mm (30 in) strap | 30 mm (1 1/8 in) or 45 mm (1 3/4 in) wide |
| 1200 mm (48 in) strap | 45 mm (1 3/4 in) wide |
| Use | Grip for turning round parts while fastening |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Practice on Plated and Plastic Pipe
When trainees fit Basin Pillar Taps, the strap holds the chrome tap body still while the back nut is tightened under the basin. The same grip turns the plastic waste parts under a Kitchen Sink or frees a stuck union nut. Trainees loop the strap round the part, pull out the slack and turn the handle, and the strap grips harder as the load rises.
In a fitting lesson, the teacher can try the strap wrench and a Pipe Wrench on the same length of pipe. Students see that the pipe wrench bites with its teeth and leaves marks, while the strap spreads its grip over a wide band and leaves the surface clean.
Frequently Asked Questions
Which strap size should I choose?
Pick the strap length by the biggest diameter you need to turn. The strap must go right round the part with some left over to pull through. The 425 mm straps suit small fittings, and the 1200 mm strap reaches round large pipe. Wider straps spread the grip over more surface.
Will a strap wrench mark chrome or plastic pipe?
No teeth touch the work, so it does not dent or scratch plated, polished or plastic surfaces. Keep the strap clean and free of grit, because dirt trapped under it can still scuff a soft finish.
How do I fit the strap around the pipe?
Pass the strap round the pipe, feed its end back through the handle and pull out the slack. Turn the handle in the direction that tightens the loop. The harder you pull, the harder the strap grips, and it lets go as soon as you ease off.
Can it be used on parts other than pipe?
Yes. It turns any round part with no flats, such as filter housings, jar lids, pulleys and tap bodies. It is also handy for holding a polished part still while a nut on it is tightened.
Can a strap wrench take the place of a pipe wrench?
For light work and finished surfaces, yes. On heavy galvanised pipe with tight or rusted joints a pipe wrench gives more turning force, but its teeth will mark the surface.
Other Wrenches for Pipe and Plumbing Work
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
