Basin Pillar Taps Manufacturer,Supplier and Exporter in India
Product Code : EL-PWI-8831
Jlab Export is a leading Basin Pillar Taps Manufacturer,and suppliers in India
Pillar taps stand upright on a wash basin, one in each tap hole, with a separate tap for hot water and one for cold. Turning the two taps gives direct control over the water temperature in the basin. These taps are made of virgin brass with a chrome finish and come in several design ranges.
Specifications
| Type | Pillar taps, separate hot and cold |
| Mounting | Vertical, on a basin |
| Material | Virgin brass |
| Finish | Chrome |
| Styles | Several design ranges |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Tap Fitting Practicals in the Plumbing Workshop
Trainees fit a pair of pillar taps to a wash basin. Each tap goes through its hole with a washer, and a back nut under the basin holds it upright. They connect the hot and cold supplies with flexible connectors and tighten the nuts with the Adjustable Wrench Set. Meanwhile a Strap Wrench holds the chrome tap body still without marking it.
Before the taps are first opened, the supply pipework is pressurised with a Pressure Testing Pump and every joint is checked for drips. A maintenance practical then shows how a dripping pillar tap is shut off, opened up and its washer or cartridge renewed.
Frequently Asked Questions
How many tap holes does a basin need for pillar taps?
Two, one for the hot tap and one for the cold. Each pillar tap stands in its own hole, so the basin must have two tap holes spaced to suit the taps.
What is the difference between pillar taps and a mixer tap?
Pillar taps keep hot and cold water apart, each with its own spout, and the user balances them by hand. A mixer tap blends both supplies in one body and delivers them through a single spout.
Why are the taps made of brass with a chrome finish?
Brass does not rust in water and is easy to cast and machine into tap bodies. The chrome coat gives a bright surface that wipes clean.
How do I stop a pillar tap turning on the basin?
Fit the washers above and below the basin, then tighten the back nut firmly while holding the tap body square. Do not overtighten on a ceramic basin, as it can crack.
Which side do the hot and cold taps go?
By custom the hot tap goes on the left and the cold tap on the right as you face the basin. The tap tops are usually marked or coloured to show which is which.
Other Plumbing Workshop Items
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
