Rivet Set Manufacturer,Supplier and Exporter in India
Product Code : EL-CLE-9100
Jlab Export is a leading Rivet Set Manufacturer,and suppliers in India
A rivet set is a hardened steel tool used to draw up a rivet before it is closed. It fits over the rivet shank and is struck with a hammer, pulling the plates together and seating the rivet head. This set has five pieces, for 4, 6, 8, 10 and 12 mm rivets, and stands in a wooden holder on the workshop bench.
Specifications
| Pieces | 5 |
| Rivet sizes | 4, 6, 8, 10 and 12 mm |
| Material | Hardened steel |
| Holder | Wooden stand |
| Purpose | Drawing up rivets before closing |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Practice: Riveting Two Plates
A standard fitting exercise is to join two mild steel strips with a row of solid rivets. Students mark the rivet pitch, dot each centre with the centre punch from the Punch & Chisel Set and drill clearance holes using the Drills. With the rivet head resting on the Anvil With Stand, they place the matching piece over the shank and strike it until the strips close up.
The tail is then hammered over and shaped into a second head. Teachers often have students saw a finished joint in half with a Hacksaw, to check that the plates were drawn tight and the shank filled the hole.
Frequently Asked Questions
What does a rivet set do that a hammer alone cannot?
It closes the gap between the plates before the rivet is headed. If the tail is hammered straight away, the plates can stay apart and the rivet ends up loose. The set pushes the plates hard against the rivet head first.
Which rivet sizes does this set cover?
It has five pieces, one each for 4, 6, 8, 10 and 12 mm rivets. Use the piece that matches the rivet diameter, so the set bears on the plate around the shank and not on the shank itself.
Is a rivet set the same as a rivet snap?
No. The set draws the plates together before closing. A snap has a cupped face and is used afterwards to shape the closed end into a round head. Solid riveting in the workshop normally uses both tools.
Can the rivet set be used with blind rivets?
No. Blind rivets are set from one side with a hand tool such as the Riveter, which pulls a mandrel to close the rivet. A rivet set is for solid rivets, where both sides of the joint can be reached.
How should the set be looked after?
Return each piece to its place in the wooden stand so the sizes stay sorted. Wipe off swarf and oil after use, and grind off any mushrooming on the struck end before it starts to chip.
Other Riveting and Bench Tools
- Riveting Tool (blind rivets, in a storage case)
- Bench Vice
- Vice Grip Pliers
- Figure Stamp Set
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
