Spot Welding Machine Manufacturer,Supplier and Exporter in India
Product Code : EL-CLE-9048
Jlab Export is a leading Spot Welding Machine Manufacturer,and suppliers in India
Spot Welding Machine (code EL-CLE-9048) is a floor-type resistance welder of at least 15 kVA that joins overlapped mild steel, galvanized and stainless steel sheet under foot-pedal control. It is water cooled, gives a throat depth of at least 16 inches and runs on a 220/380 V three-phase supply. JLab builds this foot-operated spot welder in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Process | Resistance spot welding |
| Type | Floor type, foot-operated control |
| Capacity | 15 kVA minimum |
| Throat depth | 16 in minimum |
| Electrode arm gap | 8 in minimum |
| Upper electrode movement | About 1.5 in |
| Power supply | AC 220/380 V, 3 phase, 50 Hz, with ground cable |
| Cooling | Water cooled; water receiver with motor pump (220 V, single phase, 50 Hz) |
| Weldable sheet | Mild steel, galvanized sheet, stainless steel |
| Sheet thickness | 1.5 + 1.5 mm minimum (3 mm total) |
| Quality check | Each spot welding machine is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Product code | EL-CLE-9048 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How a Spot Weld Is Made on This Machine
The two sheets are overlapped and placed between the lower and upper electrodes. Pressing the foot control brings the upper electrode down, a travel of about 1.5 inches, and clamps the joint; welding current then passes through the electrode contact, and the resistance where the sheets touch turns it into heat (I²Rt) that fuses a small nugget. Electrode pressure holds the joint while the nugget solidifies, and no filler wire or shielding gas is used. Water from the receiver, circulated by the motor pump, keeps the machine cool through a run of welds.
Reading the Throat Depth and Arm Gap
Throat depth is the reach from the electrode tips back to the frame, so with at least 16 inches a spot can be placed well in from the edge of a sheet. The electrode arm gap of at least 8 inches is the clearance between the upper and lower arms, which limits how tall a formed or flanged part can be while it sits between them. The machine can spot weld mild steel, galvanized sheet and stainless steel at a minimum of 1.5 + 1.5 mm, 3 mm in total.
Other Welding Machines and the Training Set
- Resistance Welding Machine — pneumatically clamped resistance welder for butt-joining hardened and mild steel.
- TIG Welding Machine — AC/DC arc welder with gas shield control and a water-cooled torch.
- MIG/MAG Welding Machine — gas-shielded arc welder fed with wire from a wire feeder.
- Welding Training Set — simulator for practising MMAW, TIG and MIG joints before real welding.
The machine belongs to the CAD/CAM Lab Equipments range within Mechanical Engineering Lab Equipment.
Request a Quote
Use Add To Cart to start an enquiry, or send the quantity, the electrical supply at your site and the delivery address through the contact page.
Last updated: 30 October 2026
