Riveting Tool Manufacturer,Supplier and Exporter in India
Product Code : EL-WT-12994
Jlab Export is a leading Riveting Tool Manufacturer,and suppliers in India
Everything for a first riveting job comes in one storage case. It holds a hand rivet gun, four nose pieces and aluminium blind rivets in four diameters, from 3/32 to 3/16 inch. There are 100 rivets each of 1/8 and 3/16 inch, 30 of 5/32 inch and 20 of 3/32 inch.
Specifications
| Contents | Rivet gun, 4 nose pieces, rivets and storage case |
| Nose piece sizes | 3/32, 1/8, 5/32 and 3/16 inch |
| Rivet material | Aluminium |
| 3/32 inch rivets | 20 |
| 1/8 inch rivets | 100 |
| 5/32 inch rivets | 30 |
| 3/16 inch rivets | 100 |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Sheet Metal Workshop Exercises with Rivets
A standard exercise is a lap joint between two strips of Aluminium Sheet. Students mark a row of rivet centres, centre punch them and drill clearance holes with the Drill Bit Set in a Portable Electric Drill. With the nose piece for that rivet size fitted, each rivet goes through both sheets and the handles are squeezed until its mandrel snaps.
Teachers can then have one joint cut across with a hacksaw, so students see how the rivet tail has swelled behind the sheet. A second job is drilling out a faulty rivet with a bit of the rivet’s own size and setting a new one.
Frequently Asked Questions
How many rivets come in the kit?
There are 250 aluminium rivets: 20 of 3/32 inch, 100 of 1/8 inch, 30 of 5/32 inch and 100 of 3/16 inch. The case also holds the rivet gun and the four nose pieces.
Which nose piece goes with which rivet?
Use the nose piece of the same size as the rivet, 3/32, 1/8, 5/32 or 3/16 inch, so the mandrel is a close sliding fit in it. Too large a nose piece lets the jaws slip on the mandrel, and too small a one will not take it.
Why does the mandrel snap off?
The mandrel has a weak neck. As the gun pulls it, the mandrel head swells the rivet tail against the back sheet, and once the joint is tight the neck breaks. Tip the spent stem out of the gun before the next rivet.
Why are the rivets aluminium?
Aluminium rivets are soft enough to set by hand and match aluminium sheet, so an aluminium joint has no mix of metals. They also suit thin steel sheet, plastic and fibre board in light-duty joints.
Other Riveting and Sheet Metal Tools
- Riveter (3 to 5 mm blind rivets)
- Riveting Tool (case with five boxes of rivets)
- Rivet Set
- Straight Metal Tin Snips
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
