Hand Blower Manufacturer,Supplier and Exporter in India
Product Code : EL-WT-13022
Jlab Export is a leading Hand Blower Manufacturer,and suppliers in India
A hand blower is a small electric blower, held and aimed with one hand, that blasts dust and dry debris out of places a brush cannot reach. This one has a 530 W motor for 220 V, 50 Hz. It runs at 15000 rpm under full load and moves 2.8 cubic metres of air a minute.
Specifications
| Power | 530 W |
| Supply | 220 V, 50 Hz |
| Full load speed | 15000 rpm |
| Air flow rate | 2.8 m³/min |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Practice with the Hand Blower
In a carpentry shop, trainees blow the sawdust left by the Jigsaw off the bench and out of joints before gluing or painting. The heap on the floor is then picked up with the Vacuum Cleaner, so the class learns to blow first and collect after.
Computer hardware and electrician trainees use it to clear dust from a desktop cabinet, a motor or a control panel during routine maintenance. The equipment is switched off and unplugged first. Teachers can also hold a Handheld Anemometer Digital in the jet at set distances to show how fast the air speed drops away from the outlet.
Frequently Asked Questions
What jobs is a hand blower used for?
Blowing dust out of computer cabinets, motors, switch panels and machine slides, clearing sawdust and dry chips from benches, and drying small parts after washing. Unplug any equipment before blowing it out.
What does the 2.8 m³/min flow rate mean?
It is the volume of air the blower pushes out each minute. Holding the outlet close to the work gives a sharp jet for cracks and corners, and holding it further back sweeps a wider area.
Should I use a blower or a vacuum cleaner?
A blower moves dust out of tight spaces quickly but spreads it around the room. A vacuum cleaner collects it in a tank. Many workshops blow the dust out of a machine first, then vacuum the bench and floor.
How do I blow out a computer or an electronic panel?
Switch it off and unplug it, move it near an open door and blow in short bursts from about a hand width away. Hold cooling fans still so they do not over-spin, and wear eye protection.
How is it different from the Blower Fans unit?
The Blower Fans unit stands on the floor and moves a broad stream of air for drying floors and walls. The hand blower is held and pointed, giving a fast, narrow jet for cleaning out machines and corners.
Other Workshop Cleaning Tools
- Blower Fans
- Air Compressor (with blowing gun)
- Wire Brush Set
- Pressure Washer
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
