• +91-85699-09696

Air Compressor Manufacturer,Supplier and Exporter in India

Image Not Found .

Product Code : EL-WT-13025
Jlab Export is a leading Air Compressor Manufacturer,and suppliers in India

This mobile air compressor stores air in a 270 litre tank at up to 11 bar for spray painting, tyre inflation, blowing down and parts washing. Its 4 kW motor turns at 1000 rpm, and the pump displaces 650 litres of air a minute. The machine runs on a 400 V, three-phase, 50 Hz supply.

Specifications

TypeMobile unit
Tank capacity270 litres
Air displacement650 l/min
Maximum pressure11 bar
Motor4 kW, 1000 rpm
Power supply400 V, 3 phase, 50 Hz
HoseSpiral hose with couplings
Air gunsWashing gun, inflating gun and blowing gun
Painting gunAluminium, with 500 cc upper tank
Minimum order quantity1 unit
Dispatch timeUsually 14–18 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Workshop Practice with the Compressor

Painter and motor vehicle trainees can prime a mild steel panel with Anti-Rust Paint and finish it in red, blue, green, black or white with Paints. The spraying is done inside the Spray Booth System, which draws the overspray out through the wall. Trainees thin the paint and try the spray on scrap card first. They then hold the gun square to the panel and keep it moving to avoid runs.

A pump-up test shows how much air the compressor really delivers. With the tank drained, students time the pump with a Digital Stopwatch until the tank reaches full pressure. Tank volume times the pressure rise in bar, divided by the time in minutes, gives a rough figure for free air delivered. The result always falls below the 650 l/min displacement, and the class can work out why. Teachers can also compare the gun supplied with the cup-type Spray Gun, which comes with a choice of nozzle sizes.

Frequently Asked Questions

Is 650 l/min the air my tools will receive?
No. Air displacement is the volume the pump sweeps each minute. Free air delivery, the air that actually reaches the tank, is lower because of losses inside the pump. Size air tools against free air delivery, or measure it with the pump-up test described above.

What power supply does this compressor need?
It needs a 400 V, three-phase, 50 Hz supply, so it will not run from a single-phase socket. An electrician should connect it through a suitable isolator. Check the direction of rotation at first start, because swapping any two phases reverses a three-phase motor.

Why does it have such a large tank?
The 270 litre tank holds a store of compressed air for the spray gun or blow gun. The pump then does not have to start every time a tool is used. Air cooling in the tank also lets water vapour condense there instead of in the hose.

How often should the tank be drained?
Drain the condensed water at the end of each working day, after the pressure has been let out. Water left standing corrodes the inside of the tank, and droplets carried into the hose spoil a paint finish with spots and craters.

What is the upper tank on the painting gun?
It is a 500 cc paint cup mounted on top of the aluminium gun, so the paint runs down into the gun by gravity. A gravity-feed gun uses nearly all the paint in the cup and suits panels and touch-up work. Clean the cup and nozzle with thinner straight after use.

Other Compressors and Workshop Cleaning Machines

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 6 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us