Portable Electric Drill Manufacturer,Supplier and Exporter in India
Product Code : EL-WT-13018
Jlab Export is a leading Portable Electric Drill Manufacturer,and suppliers in India
This battery drill runs on a 24 V lithium-ion pack. Trainees can drill and drive screws at a bench, on a ladder or at a wall with no cable to trail. It reaches 1750 rpm, takes bits up to 10 mm in its chuck and has an 11-position clutch. A built-in light shows the hole, and a replacement battery and a case come with it.
Specifications
| Type | Cordless electric drill |
| Battery | 24 V, Li-ion, 2 Ah |
| Replacement battery | 1 pc |
| Maximum speed | 1750 rpm |
| Maximum chuck size | 10 mm |
| Clutch positions | 11 |
| Speed control | Variable |
| Work light | Built in |
| Case | Included |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Practice with the Cordless Drill
Carpentry trainees can fix a shelf bracket to a board. They mark the screw positions with the Tape Measure, drill a pilot hole at each mark, then fit a screwdriver bit and drive the screws home. Starting on a low clutch number and moving up one step at a time shows how the clutch slips before a screw strips its hole.
For metal work, a mild steel strip is held in the Bench Vice and drilled at low speed with the smaller HSS bits from the Drill Bit Set. Electrician trainees can cut cable entry holes in a wooden or PVC switch board with a cutter from the Hole Saw Kit.
Frequently Asked Questions
What is the 11-position clutch for?
The clutch sets how hard the drill turns before it slips. Low numbers suit small screws and soft wood, and higher numbers suit longer screws and hardwood. When drilling a hole, set the highest number so the clutch does not slip.
Why does the drill come with a replacement battery?
So the work can carry on when one battery runs down. In a class where groups share the drill, a charged pack is clipped in and the flat one goes back on charge. Both packs are 24 V lithium-ion.
How big a hole can it make?
The chuck holds bit shanks up to 10 mm. For bigger holes in wood, plastic or thin sheet, fit a hole saw on an arbor that suits the chuck and run it slowly with steady pressure.
How is it different from the corded Portable Electric Drill?
Both take bits up to 10 mm and have variable speed. This model works from its own 24 V battery and adds an 11-position clutch for screw driving and a work light. The corded model plugs into the mains and never needs charging.
How should the drill and batteries be stored?
Take the battery out before changing a bit or putting the drill away. Keep the drill, both batteries and the bits together in the case, away from heat, and recharge a flat battery instead of leaving it empty for weeks.
Other Drills and Drilling Accessories
- Portable Electric Drill (corded model)
- Electric Drill (Bench Drill)
- Long Drill Bit Set
- Rotary Hammer Drill (for concrete and brick)
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026