Portable Electric Drill Manufacturer,Supplier and Exporter in India
Product Code : EL-WT-13017
Jlab Export is a leading Portable Electric Drill Manufacturer,and suppliers in India
A corded hand drill for 220 V single phase mains, with variable speed and a chuck that takes bits up to 10 mm. It is light enough to use in one hand for pilot holes and clearance holes in wood, metal and plastic, and it is supplied in a carrying case.
Specifications
| Type | Corded, portable |
| Supply | 220 V, single phase |
| Maximum chuck size | 10 mm |
| Speed | Variable |
| Case | Included |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Practice with the Hand Drill
In a sheet metal exercise, trainees clamp two strips of Aluminium Sheet together, drill matching holes through both and join them with pop rivets using the Riveter. The hole size is picked from the Drill Bit Set to suit the rivet, staying within the 10 mm chuck.
Carpentry classes drill a pilot hole and a clearance hole for each wood screw before fixing a bracket to a board. Teachers show how a punch mark and a slow start stop the bit wandering across metal.
Frequently Asked Questions
What size drill bits does it take?
Any straight shank bit up to 10 mm, the maximum chuck size. Larger holes in steel are better made on a bench drill, where the work is clamped and the feed is steady.
Can it drill brick or concrete?
It is a plain rotary drill with no hammer action. It may drill soft brick slowly, but not concrete. For concrete and hard masonry, use a Rotary Hammer Drill with carbide-tipped masonry bits.
How does variable speed help?
A light squeeze on the trigger turns the bit slowly, so it can start on a punch mark without skating off. Use slower speeds for large holes, steel and plastics, and faster speeds for small holes in wood.
Why does the drill get hot and slow down?
Usually the bit is dull, the speed is wrong for the hole, or the drill is being pushed too hard. Let a sharp bit cut with steady pressure and keep it square to the work. On long jobs, rest the drill now and then and keep its air vents clear.
How should the drill be looked after?
Unplug it before changing bits, keep the air vents free of dust, and check the cable and plug for damage before each class. Store it in its case so the drill and bits stay together.
Other Drills and Drill Bits
- Portable Electric Drill (cordless model)
- Electric Drill (Bench Drill)
- Portable Drill Machine
- Long Drill Bit Set
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026