• +91-85699-09696

Portable Drill Machine Manufacturer,Supplier and Exporter in India

Portable Drill Machine

Product Code : EL-WWM-8676
Jlab Export is a leading Portable Drill Machine Manufacturer,and suppliers in India

This portable drill machine is a hand-held electric drill with a low top speed. Its no-load speed rises from 0 to 500 rpm, so a hole can be started slowly and fed in by hand. It comes in 5.0 mm and 10.0 mm sizes, with drill depths of 0–10 mm and 10–20 mm.

Specifications

TypeElectric drill, hand-held
Sizes5.0 mm and 10.0 mm
Drill depth0–10 mm and 10–20 mm
No-load speed0–500 rpm
Minimum order quantity10 units
Dispatch timeUsually 4–6 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Workshop Practice with the Portable Drill

A first drilling exercise in a school or ITI workshop is a small bracket in aluminium or acrylic sheet. Students mark the hole positions with a Scriber and a Square and grip the part in a Hand Vice. They drill at low speed so the plastic does not melt round the bit.

A second exercise is a row of blind holes in a wooden rail, all drilled to the same depth. A flag of tape on the bit marks the depth. Small bits from the Drill Bit Set suit both jobs. Teachers can then compare holes drilled fast and slow in the same plastic.

Frequently Asked Questions

Which size should I choose, 5.0 mm or 10.0 mm?
Pick the 5.0 mm size for small pilot holes, screw clearance holes and light model work. Choose the 10.0 mm size when the jobs include larger holes. Tell us which size, or how many of each, you need.

How do I drill a hole to a set depth?
Wrap a flag of tape round the bit at the depth you want and stop when the tape touches the surface. Pull the bit out now and then to clear the chips, which also keeps a blind hole clean at the bottom.

Why is a low top speed useful?
Acrylic and other plastics soften when a bit spins fast, and a fast bit tends to skate on a smooth face before it bites. Starting slowly on the 0 to 500 rpm range lets the point find the centre mark and keeps the cut cool.

How should small parts be held while drilling?
Never hold them in your fingers. Grip them in a hand vice or a bench vice, or clamp them to scrap wood. Then the bit cannot spin the part if it grabs as it breaks through.

Other Hand-Held Drills

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 6 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us