• +91-85699-09696

Jig Saw Machine Manufacturer,Supplier and Exporter in India

Jig Saw Machine

Product Code : EL-WWM-8616
Jlab Export is a leading Jig Saw Machine Manufacturer,and suppliers in India

Unlike a hand-held jigsaw, this jig saw machine stays put while the work moves. A fine blade runs up and down through a 12 x 12 in table, and the operator steers the board around it with both hands. That makes tight curves and inside cut-outs much easier. The machine is 24 in size, cuts 24 x 1.5 in and weighs about 60 kg.

Specifications

Machine size24 in
Cutting capacity24 x 1.5 in
Table size12 x 12 in
Approximate weight60 kg
Minimum order quantity1 unit
Dispatch timeUsually 14–18 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Workshop Exercises in Curved Cutting

Students trace a pattern such as a toy, a shelf bracket or a letter onto board and cut it out, staying just outside the line. For a shape with an opening in the middle, they first drill a hole in the waste on the Drill Press. The blade is threaded through it, and the opening is cut from inside. Outside curves are then sanded to the line on the Disc Sander.

Teachers can set the same shape with Coping Saws at the bench. Students then compare speed, squareness of the cut edge and how closely each method follows the line.

Frequently Asked Questions

What do the 24 in size and the 24 x 1.5 in capacity mean?
On a jig saw machine, the first figure is the reach from the blade back to the frame, which limits how far into a board you can cut. The second figure, 1.5 in, is the thickest stock it will cut.

Why do blades break or wander off the line?
Most breaks come from the wrong tension or from forcing the work. A slack blade bends and drifts, and one set far too tight snaps early. Feed gently and let the teeth cut. A dull blade, or one too coarse for the stock, also wanders, so change it before a tight turn.

Which blade should I fit?
Narrow, fine-toothed blades turn tighter curves and suit thin stock. Wider, coarser blades cut thick timber faster but cannot follow small curves. Fit the blade with its teeth pointing down towards the table, so the cut presses the work onto the table.

How is it different from a portable jigsaw?
Here the saw stands still and the small workpiece is moved around the blade on a flat table, which gives finer control. A portable jigsaw is carried to the work and suits cuts in large sheets that would not fit on a table.

Hand-Held Jigsaws in the Range

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 6 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us