• +91-85699-09696

Portable Jig Saw Machine Manufacturer,Supplier and Exporter in India

Portable Jig Saw Machine

Product Code : EL-WWM-8671
Jlab Export is a leading Portable Jig Saw Machine Manufacturer,and suppliers in India

Rated at 580 W on a 220 V supply, this portable jig saw machine is held in one hand and steered along the line. Its short blade strokes up and down from 500 to 3000 times a minute, and its cutting capacity is 65 mm. Carpentry students use it for curves, shapes and inside cut-outs in timber and board.

Specifications

Rated input power580 W
Rated voltage220 V
Cutting capacity65 mm
No-load stroke rate500–3000 per minute
Minimum order quantity10 units
Dispatch timeUsually 4–6 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Jigsaw Practicals for Carpentry Students

A good first job is a shaped coat-hook board or a toy cut from plywood. Students trace the template, clamp the sheet so the line overhangs the bench and cut just outside the line. They then work back to it with the rasps in the File set and finish with a Sanding Block.

For a window in a panel, a hole big enough for the blade is first made in the waste with the Portable Drill Machine. The blade goes through the hole before the saw is switched on. Teachers can set a test piece with one curve cut fast and one cut slow, to show how speed changes the edge.

Frequently Asked Questions

What does the 65 mm cutting capacity mean?
It is the thickest material the saw is rated to cut. For timber close to that size, use a long, coarse wood blade, feed slowly and let the blade clear its sawdust. Metal sheet needs a fine-tooth metal blade and is cut far thinner.

Why does the saw shake on thin sheet?
Jigsaw teeth cut on the upstroke, so they try to lift the work against the base. Keep the base pressed flat and clamp the sheet close to the line. A fine-tooth blade also cuts thin material more smoothly.

How tight a curve can it cut?
That depends more on the blade than the saw: a narrow blade turns tighter than a wide one. For a very tight curve, first make relief cuts from the edge to the line. The waste then falls away in pieces as you go round.

How do I start the saw for an inside cut?
Rest the base flat on the work with the blade in the drilled hole, clear of the wood. Switch on, let it reach speed, then feed into the line. Never start the saw with the blade touching the work.

Other Saws for Curves and Shapes

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 6 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us