Portable Drum Sander Manufacturer,Supplier and Exporter in India
Product Code : EL-WWM-8675
Jlab Export is a leading Portable Drum Sander Manufacturer,and suppliers in India
A 9 in aluminium drum wrapped in hook and loop sandpaper does the work on this drum sander. It sands boards 9 to 18 in wide with no limit on their height, and a micro height adjustment knob sets the drum. The 1/3 HP, 115 V motor runs at 1700 rpm, and a down-draft system pulls the dust out through a 2-1/2 in port.
Specifications
| Motor | 1/3 HP, 115 V, 1700 rpm |
| Drum | 9 in wide, CNC-machined aluminium, hook and loop wrapped |
| Sanding capacity | 9 to 18 in width, unlimited height |
| Top | 1/8 in zinc-plated steel |
| Height setting | Micro height adjustment knob |
| Base | Powder coated steel |
| Dust collection | Integral down-draft system, 2-1/2 in dust port |
| Sold separately | Sandpaper, keyless chuck, fence and double mops |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Exercises with the Drum Sander
A common carpentry project is a chopping board or box lid glued up from narrow strips. Students glue the strips and press them together with a G-Clamp at each end until the glue sets. They then sand the glue lines flush on the drum in light passes, turning the panel end for end between passes.
Students check the panel for flatness with a Steel Rule laid on edge across it, looking for light under the rule. The final surface goes to an Orbital Sander Machine with a finer grit. Teachers can show how a deep pass slows the drum and leaves burn marks.
Frequently Asked Questions
How does a 9 in drum sand boards up to 18 in wide?
Boards up to 9 in wide are sanded in one pass. For wider boards, sand one half, turn the board end for end and sand the other half, with a small overlap in the middle. Keep the drum setting the same for both halves.
How is the sandpaper changed?
The drum is hook and loop wrapped, so a worn strip peels away and a new one presses on. Wrap it tight and even, with no gaps or overlaps. Sandpaper is sold separately, so order a few grits with the machine.
How much should be removed in one pass?
Very little. Set the micro height knob so the drum just touches the wood, sand, then adjust a fraction at a time. A heavy cut slows the 1700 rpm motor, loads the paper with dust and can scorch the surface.
What else may I need to order?
Sandpaper, the keyless chuck, the fence and the double mops are all sold separately. The sandpaper is needed from day one. Add the fence, chuck and mops only if your course or work calls for them.
Other Sanders and Sanding Tools
- Disc Sander (12 in disc on a tilting table)
- Disc Sander Belt
- Sanding Block (cork, for hand finishing)
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
