• +91-85699-09696

Mitre and Table Saw Manufacturer,Supplier and Exporter in India

Mitre and Table Saw

Product Code : EL-WWM-8621
Jlab Export is a leading Mitre and Table Saw Manufacturer,and suppliers in India

This saw does two jobs at the bench. As a mitre saw, its 255 mm blade comes down through stock held against the fence for square, angled and compound cuts. A square cut takes stock up to 70 x 110 mm. Used as a table saw, it rips boards and cuts strips. The 1800 W motor runs on 220–240 V AC and turns the blade at 5000 rpm.

Specifications

Rated power1800 W
Rated voltage220–240 V AC
Blade size255 x 30 x 3.0 mm
Rotation speed5000 rpm
Maximum cutting depth46 mm
Cutting capacity 90°/90°70 x 110 mm
Cutting capacity 90°/45°70 x 70 mm
Cutting capacity 45°/90°40 x 110 mm
Cutting capacity 45°/45°35 x 60 mm (L), 40 x 90 mm (R)
Table size420 x 300 x 290 mm
Minimum order quantity1 unit
Dispatch timeUsually 14–18 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Workshop Practice: Frames and Strips

A good first project is a mitred picture frame. Students rip the frame moulding to width on the table side of the saw, then cut the corners at 45 degrees on the mitre side. They measure the lengths with a Tape Measure so that opposite sides match exactly. The corners are glued, checked with a Square and pinned with the Nailer Gun.

Teachers then set the saw for compound cuts and let students compare the capacity at each setting with the table. The 3 m cable lets the saw stand on a bench away from the wall socket.

Frequently Asked Questions

What do the cutting capacity figures mean?
Each line gives a pair of angle settings and the biggest section of timber it cuts at them. At 90°/90°, the plain square cross-cut, it takes stock up to 70 x 110 mm. At 45°/45°, the compound setting, it takes 35 x 60 mm on the left and 40 x 90 mm on the right.

What blade does it take?
The blade size is 255 x 30 x 3.0 mm: 255 mm across, with a 30 mm bore, 3.0 mm thick. For clean mitres in frames and trim, choose a blade with many fine teeth. Fit it with its teeth facing the way the saw turns.

How loud is this saw?
Its sound power level is 106 dB(A), which is loud enough to harm hearing over a session. The operator and anyone working close by should wear ear protection, and teachers can place the saw away from quieter benches.

Why does a mitred corner open up?
A small error in the angle is doubled when two mitres meet, and unequal lengths on opposite sides pull a frame out of square. Make a test corner from scrap, check it with a square and correct the setting before cutting the real moulding.

Other Saws for Cross-Cutting and Ripping

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 6 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us