• +91-85699-09696

Chain Saw Manufacturer,Supplier and Exporter in India

Chain Saw

Product Code : EL-WWM-8679
Jlab Export is a leading Chain Saw Manufacturer,and suppliers in India

Powered by a petrol two-stroke engine, this chain saw drives a toothed chain round a guide bar to cut through logs and branches. It is used for felling trees, for limbing (taking the branches off a felled trunk) and for bucking the trunk into lengths. Pruning and cutting firewood are its other everyday jobs.

Specifications

TypePortable mechanical saw, cutting chain on a guide bar
PowerPetrol (gasoline) two-stroke engine
UsesTree felling, limbing, bucking, pruning, firewood cutting
Minimum order quantity10 units
Dispatch timeUsually 4–6 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Practical Training with the Chain Saw

In forestry, agriculture and carpentry training, a first exercise is bucking a log into equal billets on a saw horse. Trainees mark each cut with a Tape Measure. They wear a Safety Helmet and Grinding Goggles against flying chips.

Before the engine starts, the instructor runs through the daily checks: chain tension, chain oil level and a sharp chain. Trainees can cut one billet by hand with a Cross Cut Saw first. That shows how the two cuts differ and why a dull chain makes the saw hard to feed.

Frequently Asked Questions

What fuel does a two-stroke chain saw use?
Petrol mixed with two-stroke engine oil, never plain petrol. Mix it in a clean can to the ratio marked for the engine, and shake the can before each fill. Running on plain petrol starves the engine of oil and soon damages it.

How is the chain kept lubricated?
The chain needs bar and chain oil while it runs, which is separate from the fuel mix. Check the chain oil each time you refuel. Revved over a clean surface, a working chain throws a light line of oil off the bar tip.

How tight should the chain be?
Snug on the bar, yet free to pull round by hand with gloves on and the engine off. It should not sag below the bar. Check it cold and again after the first few cuts, because a new chain stretches.

How do I know the chain needs sharpening?
A sharp chain throws chips, while a dull one makes fine dust, pulls to one side or has to be forced into the wood. Each cutter is filed with a round file sized for the chain, giving every tooth the same number of strokes.

Can it be used for carving or milling planks?
Chain saw carving and chain saw mills use specially designed bar and chain combinations. For felling, limbing, bucking, pruning and firewood, a standard bar and chain does the work.

Other Timber Cutting Saws

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 6 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us