Saw Manufacturer,Supplier and Exporter in India
Product Code : EL-WT-8784
Jlab Export is a leading Saw Manufacturer,and suppliers in India
This masonry bench saw cuts bricks, blocks, stone, tiles and slabs with a water-cooled diamond blade of up to 450 mm. The work rides on a sliding table under the blade, and a beam sets the cutting height. It takes pieces up to 120 mm thick and 500 mm long, and runs on a 2200 W single-phase supply.
Specifications
| Saw type | Masonry bench saw with diamond blade |
| Blade | Disc up to 450 mm diameter |
| Maximum disc speed | 2800 rpm |
| Cutting capacity | Up to 120 mm thick and 500 mm long |
| Sliding cutting table | 570 x 430 mm, 550 mm travel |
| Fitted with | Pedal control, water cooling circulation pump, emergency switch, cutting angle device, beam for cutting height |
| Power supply | 220–240 V AC, 50 Hz, single phase |
| Rated power | 2200 W |
| Dimensions | 1220 x 700 x 1360 mm |
| Weight | 130 kg |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Setting Up a Cut
The brick or tile sits on the sliding carriage, which travels 550 mm under the blade. The beam raises or lowers the cutting head to suit the thickness, and the cutting angle device holds the work for an angled cut. A circulation pump feeds water to the blade throughout the cut. A pedal control and an emergency switch are fitted.
Workshop Practice for Masonry Trainees
In a masonry or building construction workshop, trainees mark bricks with the Square and cut half bats, quarter bats and closers for bonding practice. They then lay a short wall in English bond with a Trowel and check each course with the Plumb & Spirit Level.
For tiling practice, students measure the gap at the end of a row, cut a tile to that width and set the cutting angle device for mitred corners. Teachers can show how a diamond blade grinds its way through hard material, and why the feed is kept slow and even.
Frequently Asked Questions
Which diamond blades can be fitted?
The saw takes discs up to 450 mm, and diamond blades of 350 mm, 400 mm and 450 mm diameter are offered as accessories. A larger blade reaches deeper into thick blocks and slabs, while a smaller one is enough for tiles.
What materials can this saw cut?
It is meant for small to medium building materials such as bricks, blocks, stone, tiles and slabs. Pieces up to 120 mm thick and 500 mm long fit the cut. Metal and timber need other saws and blades.
Why does the blade need water?
Water from the circulation pump cools the diamond blade and washes the ground slurry out of the cut. A diamond blade run dry on masonry overheats and wears fast. Keep the water supply topped up and run the pump before each cut.
What power supply does it need?
It runs on 220–240 V AC, 50 Hz, single phase, with a rated power of 2200 W. A single-phase workshop circuit able to carry that load is enough, and no three-phase supply is needed.
How long a piece can be cut in one pass?
The maximum cutting length is 500 mm. The 570 x 430 mm sliding carriage travels 550 mm, which carries a full-length piece right through the blade. Longer slabs are marked and cut in sections.
Other Saws and Cutting Tools
- Masonry Hole Saw (carbide-tipped hole saw cutters)
- Portable Circular Saw
- Hacksaw Frame
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
